Versorgungs EL T-Shirt-Panel, EL-Entzerrer-Panel für ts

Product DescriptionProduct name: EL flashing panel for T-shirt Size: Any size according to customer's requirement Design: We have hundreds of designs in stock. We can make any customized design.Flashing effect: 5 channels Function: Sound active Panel thickness: 0.2-0.3mm Inverter: DC6V, use 4AAA batteries MOQ: 100PCS Production time: 5-7 workdays Specification: 1.EL panel: Sound sensitive,high brightness ,no heat ,long lifetime,over 250 styles of panel sheet, customer design are welcome 2.EL T-shirt : Colour : any colour for customer option(Black ,white ,pink ,green ,red,ect) Material:100% pure cotton,light and thin,comfortable feeling Size: S,M,X,XL ,XXL(Standard European size) Power:4xAAAbattery pack ,2 AA battery pack 3.Packing: PVC/OPP bag per picece 50 pieces/carton ,G.W:18KG4.Accessories: EL panel EL driver(inverter): 5.Washing instructions: Washing dry or hand wash, pls remove the el panel and power before clearning Do not submerge any part of the flash panel and cable Pls make sure ervry parts are dry when after washing the t-shirt to use (Light T shirt light principle)ELT shirt which has a drive to control the use of cable circuits and light emitting chip produces positive and negative conductive material issued flash effect.Cable joints at both ends for the pins, jack, free cleaning when the demolition is not fixed to the clothes which caused not removable.There are two drivers, adjustable voice-driven flash 8 and the five drivers, all with 7 alkaline batteries, each able to control about 6-10 hours of continuous light.EL T shirt - and the difference between the type of drive)--- Adjustable voice-driven sound according to the size of the external drive next to a small adjustment knob, so as to control light flicker sensitivity. With 2 AAA batteries.Flash drive --- 5 8 non-voice, manual adjustment of the drive next to the small buttons and stalls, to control the light flicker effect, eight kinds of flashing mode can be manually selected.(el T shirt - how to use a different drive)Adjustable with the use of voice-driven: first of all into two 7 cell [location to the right] of cable should pay attention to positive and negative level.Then switch to open, if not flash drive connected, first check the connections first and insert anti-drive there, two joints should be no word on the word or words on the word means no plug, the final regulation drive next to the knob can take a look at the sensitivity of flicker.Five flash drive with the use of 8: First of all, on the 7th into four batteries, open the switch to drive the small round button next to the flash can be adjusted in different ways, small round button below the stalls can be adjusted in different frequency bands.