Verdeckte Handbrause mit Dusch

Production Walrus faucets are user-friendly and beautifully designed. They are produced in facilities that are managed under International Standard Organizations (ISO) production standards. The body and lever are crafted with 59% brass which warrants durability. Walrus faucet internal tubing are strictly controlled and kept between 1-1.5mm. Customers can be assured that the quality control used in manufacturing Walrus products. The 0.3mm durable exterior chrome-plating finish on Walrus faucets helps maintain its shine and makes it easy to clean. Walrus faucets can withstand over 12kg of pressure, which is better than the international standard. Whether it is product design or quality, Walrus faucets can match those of highly regarded international brands. Copper, brass alloy and brass ingot are the typical the raw materials used in casting the body of faucets. The techniques used in casting the faucet bodies are gravity casting, mold casting, and sand casting. The casted faucet walls can bear over 6kg of water pressure per cm2 . The hollow core of the faucet is made by using a sand core. To form the sand core, a special mixture of sand, resin, and curing agent is molded into the shape of the faucet core. The benefit of quality casting over regular casting is the faucets created from quality casting come out with a smoother surface, making it easier for further processing. At the same time, quality casting helps maintain consistent product quality and products with less air hole. Processing Further processing is required for the body and parts of a faucet. The processing occurs along the production in a flowing method. The faucet is progressively processed at each station in the production line. The flow method in producing Walrus faucet and spare parts allows workers to set up several check points along the production line to ensure accuracy and consistency in manufacturing each product. Polishing and Grinding Polishing machinery is used to polish the surface of faucets and spare parts to increase its shine. Grinding: Sanding belt #100, 200, 400Grinding wheel or manual buffering using Cleaning and testing: final testing of the assembled faucet and removing residues of polishing pastes used during the polishing process Plating Through the different stages of processing, a metal coating is formed on the surface of the faucet. After three layers of coating of copper, chromium, and cast our faucets are made wear-resistant with a longer lasting shine. Plating process: ultrasonic vibration cleaning, chemical degreasing, ultrasonic wax removal, electrolysis oil, pickling, washing, nickel, chromium, de-ionized rinsingNickel thickness: 7mm (international standard) to make the products proportionateChromium thickness: 0.4mm (international standard 0.2mm) for aesthetic purposesPlating experiment: Testing the concentration of the plating solution through Hull cell experiments. Other experiments are also used to test the corrosion resistance, adhesion properties an, wear ability of the plated surface. Assembling After the faucet body and parts have been plated, they are ready to be assembled. The most important part of the faucet is the ceramic cartridge. Depending on clients demand, Walrus can assemble faucets with local cartridges or cartridges imported from Taiwan, France, Italy, or Spain. The benefits of using imported cartridge are as follows: Tough, wear resistant, lasts longer (three to ten times stronger than ball type or plastic cartridge, guaranteed to last over 500,000 uses)Suitable for any water type, not affected by any water impuritiesHas lubricationCan withstand a wider range of water temperatureOutlet of cartridge is covered with multiple layers of wire mesh filter which helps create air bubbles in the water flowing through it. This creates a smoother water flow without making splashes. It also creates a comfortable touch when the water flows out and helps reduce 50% water usage.