Vakuumformmaschine für Cabinet Liner

General Technical Data(i.e.: 5 stations)Max forming area : 2000mmX1000mmMax forming depth: 650mmHeating power: 303KwTotal power : 460Kw(380V,50Hz)Total gas consumption: 3m³ /min( 0.5Mpa 0.65Mpa )Cooling water consumption: 20 m³ /h(5°C 15°C)Forming mode: Male molding (with air pressure)Cycle time : ≤36 s/pcsSheet material: ABS ,HIPS or PSSheet thickness : 2.5mm 6.0mmThe line is mainly used for refrigerator cabinet vacuum thermoforming. It consists of loading station, preheating station, heating station, forming station, cutting station, unloading station, etc.The mode are available: chain type, clamp type. The line have four work stations and five work stations according to cutting station. According to the foaming craft, the line can be available: suction type and bubble type.The line adops intelligent temperature controller, servo motor driver, low-temperature air cooler and so on. High automaticity, easy operation, high efficiency, etc.It consists of loading station, preheating station, heating station, forming station, cutting station, unloading station, etc.