UltiPower 24V 30A automatisches Ladegerät

UltiPower 24V 30A automatic battery charger UltiPower automatic 24V 30A heavy duty charger is an intelligent charger. It applies advanced charge algorithm. The charger is suitable for heavy duty electric vehicle ,forklifter, pallet and other applications . The charger generate less gassing amount compare with conventional charger. The raise of the battey temp. during the entire charge process is also much lower. Benefits of UltiPower Switch-mode Chargers:Small size and light weight No tapering of current - Constant Current In the conventional chargers, the current reduces as the battery voltage goes up. For example an 8 Amp charger, the current will start at 8 Amp and will go down as the battery voltage increase. At the end (full charge) the current is almost zero. So the charger is giving an average of 4 Amps. The switch-mode charger gives a constant current. In charging time, the constant current is equal to twice the tapered current. So a 4 Amp Constant Current battery charger is as fast (in some cases faster) than a tapered 8 Amp conventional charger. Note: Some conventional chargers are constant current types but these are more expensive, larger in size and weight. More Reliable:In switch-mode, the transformers are installed on the electronics circuit board. Since all components are on circuit board, the switch-mode chargers are much more reliable. Ability to function with AC voltage fluctuationsThe switch-mode chargers are capable of large AC voltage fluctuations without any loss of output power. For example a properly designed switch-mode charger of 115VAC input will operate at 90VAC. So 115VAC chargers can be used in Japan where the voltage is 100VAC.