UF-Membranfilter von UF8040A (PP)

UF membrane module of UF8040A(PP)-UPVC 1. PP hollow fiber membrane technical data Raw Material PP External Shape Hollow fiber Diameter Inside 320um-350um Diameter Outside 400um-450um Pore Size 0.02um-0.2um Pore Density40%-50% X-axis Strength 120MpaVentilation Rate >7.0x102cm3/cm2.s.cmHg Available Temp. 4-45 PH 0-14 Molecule cut 50000-80000 Ref. pressure 0.1-0.3Mpa Pore size can be slightly adjusted by different processing to meet different requirements, such as 0.02x0.2um, 0.02x0.1um, etc. 2. Tech data of the UF8040(PP)-. 1. Size: φ200x1300mm 2. Ref. permeation rate (0.1Mpa), >5500L/H. 3. working pressure: 0.25Mpa. 4. Max. working pressure. 0.35Mpa. 5. Casing materials:UPVC 6. Connection pipe: in/out let port: DN40MM 7. Type : outside to inside pressure;/ inside to outside pressure 3.Application Area: Filtration waste-water after biochemical treatment, Removing bacteria and purifying tap water and surface water purification, Pretreatment for Reverse Osmosis systems, Pretreatment for sea water desalination, Purifying & recycling industrial waste-water, concentration and separation allied on chemical industries. 4. The structure of the UF modules (outside to inside pressure type); 5. The tech. data of the feed in water The size of particle ≤50um BOD5 ≤30mg/L Turbidity ≤20NTU CODcr ≤50mg/L PH 1-14 Temp. 4-40 Working pressure ≤0.25Mpa Max. pressure ≤0.40Mpa 6. The tech. data of permeated water Microorganism remove out ≥99% Turbidity ≤0.2NTU SDI ≤2.5 SS ≤0.5