Trocken-Magnetscheider

Magnetic separator:Magnetic separatorcan separate raw materials with different magnetic rigidities. The machine works by using magnetic force and the machine force. Magnetic separators are designed to recover ferromagnetic materials. The separators are available in designs and sizes to provide solutions for all applications.The mineral slurry flows into the cell through box feeder, the mineral particle is loose under the function of water flow of feeder water pipe when they flow into the cell. Affected by magnetic field, the magnetic particle swarm together and form magnetic cluster or chain.With the magnetism of mineral slurry, the magnetic cluster or chain moves toward the magnetic pole, and is absorbed to the cylinder. Because of the polarity of magnetic pole, the revolving directions alternate constantly, and remain fixed when it is working. When the magnetic cluster and chain go round and round along with the cylinder, the mingled gangue and other non-magnetic ore fall down due to the mixing phenomena produced by alternation of magnetic poles, and it is concentrate that is absorbed to the cylinder surface. The concentrate moves to the end of magnetic system where the magnetism is weakest along with the revolving cylinder, and is discharged into concentrate tank by the current ejected by the discharging-ore pipe. The non-magnetic or weak magnetic remained are discharged along with the mineral slurry, and they are gangue. Type Rattler diameter (mm) Rattle length (mm) Corresponding belt width (mm) Magnetic induction of the cylinder surface (mT) Allow the maximum torque (N.m) Selected size (mm) Handing ability (t/h) Weight (kg) CT-0404 410 465 400 150 160 1300 10 40 >100 250 CT-0505 520 500 400 150 1300 10 40 >100 500 CT-0506 520 600 500 150 2100 10 40 >100 600 CT-0507 520 750 650 150 2120 10 40 >100 700 CT-0707 750 750 650 >160 2860 10 60 >100 1200 CT-0709 750 950 800 >160 5500 10 60 >100 1620 CT-0816 800 1600 1400 >160 9760 10 100 100 150 2850 CT-1010 1000 970 800 200 210 5590 <100 150 200 3410 CT-1012 1000 1170 1000 >200 10680 <100 200 4010 CT-1014 1000 1400 1200 >200 12810 10 100 200 1600 CT-1016 1000 1600 1400 160 210 14920 10 100 150 200 5200 CT-1210 1200 970 800 160 210 8380 <100 150 200 4380 CT-1212 1200 1170 1000 >160 10470 <100 200 5280 CT-1214 1200 1400 1200 >160 12570 <100 200 6070 CT-1216 1200 1600 1400 >160 14580 <100 200 6670 CT-1218 1200 1800 1600 >160 16620 <100 200 7260 CT-1412 1400 1200 1000 >160 16000 <120 200 6000 CT-1414 1400 1400 1200 >160 20000 <120 200 7100 CT-1416 1400 1600 1400 410 25000 400 300 9800