Transparent hochwertigen Komponenten-Kleber

Nature: Made by Germany imported original chemicals, transparent fluid, solidify quickly under room temperature, strong adhesion, resist from water, oil, acid and alkali. Castable and stuffable, grindable after solidification. Solidification: 5-10 minutes (room temperature) Cutting strength: >=10Mpa Adhesion: 10Mpa Direction: 1. If the surface is not rough enough, use sand paper or grinder to make it rough before applying glue. 2. Use acetone or spirit to clean the surface if possible, don’t leave any dirt or powder on it. Use cleanser with water for replacement if the condition not available. 3. This easy-packing is for glue gun specially. Install the plastic tube of SuTeGu onto the glue gun first, then fix a mixing tube onto the open end of the plastic tube and make sure to keep it tight, let the mixed adhesive squeezed out from the mixing tube under the pressure of the glue gun. 4. Apply the glue evenly, use adhesive tape to tight and fix the objects for 15-30 minutes after being glued. Caution: Use knife to remove unnecessary glue left on the objects. When being glued onto skin, clean it with spirit or soap. Seal the glue tightly after used and put it in dark and cool place. Keep the children away from the glueNature: Made by Germany imported original chemicals, transparent fluid, solidify quickly under room temperature, strong adhesion, resist from water, oil, acid and alkali. Castable and stuffable, grindable after solidification. Solidification: 5-10 minutes (room temperature) Cutting strength: >=20MpaTensile strength: 7800PSIAdhesion: 12-14MpaDirection: 1. If the surface is not rough enough, use sand paper or grinder to make it rough before applying glue.2. Use acetone or spirit to clean the surface if possible, don’t leave any dirt or powder on it. Use cleanser with water for replacement if the condition not available.3. This easy-packing is for glue gun specially. Install the plastic tube of SuTeGu onto the glue gun first, then fix a mixing tube onto the open end of the plastic tube and make sure to keep it tight, let the mixed adhesive squeezed out from the mixing tube under the pressure of the glue gun.4. Apply the glue evenly, use adhesive tape to tight and fix the objects for 15-30 minutes after being glued.