TQYF-6.3 Voraus Vorentladung Blitzableiter

Operation Principle of TQYF-6.3 Advance Pre-discharge Lightning Rod: The TQYF series lightning rod adopts international advanced technique, presently it has obtained patent, its exciter absorbs and stores energy from nature electric field. There is well electrical connection existed among reflector, point of lightning arresterand earth, stays at equipotential state. So, under normal conditions, there is electric field strength existed between exciter and emitter, which would be repidly augmented before thunder& lightning, the potential difference between exciter and reactor isabout equivalent to electric potential between thundercloud and earth, the voltage drop between them would be increased rapidly, which would lead to strike fire of point and air ionization around point, so as to form point discharge phenomenon. The air ionization around point resulted from rapid increasing of electric field between central collecting pole of lightning rod and exciters would lead to discharge within short and accurate period, for a large amount of electriction exists, the nature corona effect would be reduced, which forms one anticipated upward discharge passage, it would rapidly and safely intercept thunder lightning, moreover, it can release the thunder lightning down to earth. Product Characteristic: No need maintenance, non-electronic, long life; No electronic system, it would not be damaged because of surge impulse, the protective quality would not be changed after thunder-strike; Many different protective radiuses is given for customer selection; It can not be self-activated until there is lightning , completely active form intercept thuner& lightning system; Be safe and reliable, import foreign advanced technique, it had passed test of related state department. Product Mechanism: central collecting pole reflector trigger equipment exciter fixed plate of exciter it is insulated one another among exciter, reflector and central collecting pole there is well electrical connection existed between earth and reflector/central collecting pole the base of exciter is made of synthetic resin, it can be operated under any corrosive condition. Inner-space and tooth depth:38mm x 1.5mm