Toilette

Walrus Toilet1. CeramicWalrus Ceramic materials are used 2.5 times higher than other ordinary factories in price. We use an exclusive drying room, so get good results in molding ceramics. Ceramic firing, in the part of fuel and Kiln Equipment, we are investing heavily to improve world-class production equipment. Especially in the temperature control, we can ensure that the ceramic firing in 1260 degrees Celsius. This is the non-general. So the finished Ceramic can be Glass-ceramic formation, and the ceramic glaze and the ceramic body can stick together sufficiently. Even though the outside world changes into instant hot or cold, our ceramic is not easy to crack and split, glazed –off and so on bad phenomena. Aspects of product design, we use the high-class European and American design style, combined humanized design, 6L 888Walrus close-coupled closet 2.6kg6L101010 3. The capacity of water: National standard dilution rate should be not less than 100. (Walrus dilution rate is not less than 200.) 4. National standard: The total length of the ink residual traces after each washing should be less than 50mm. (As Walrus can make it less than 45mm even all wash away.) 5. Trap seal and catchment area: National standard height of toilet’s water seal should be not less than 50mm. (Walrus is between 50-70mm, guaranteed the catchment area, saving-water, anti-smelly and splash.) 6. Noise level: National standard high- grade toilet flushing noise shall not exceed 55DB. (Walrus can make it lower than 54 DB.) 7. Conservation of water: Some of Walrus toilet’s conservation of water is 6 liter. Two-stage flush toilets have a flushing function of 6 or 3 liter, which can save 67% water better than 9 liter flush toilet. 8. Water absorption rate: According to National standard, water absorption rate of high- grade sanitary ware shall not exceed 1%. Water absorption average rate of vitreous china shall not exceed 0.5%. Walrus can make it 0.25%, which can prevent smudge and smelly. 9. Anti-cracking test: Test condition: after putting the toilet into the hot water (97.5Degrees Celsius) for 2 hours, quickly out into the cold water (3 Degrees Celsius) for more than 5 minutes. Test results are as follows, commodity overflowglazethermal stabilityWalrusslight crackno crackgoodBrand Avery obvious crackobvious crackinferiorBrand Tobvious crackslight crackgeneralBrand Kvery obvious crackslight crackgeneral Conclusion: Walrus toilet’s function of Anti-cracking is obviously better than the other three brands. nice color and simple elegant style together. We use the milling machine fine-grinding, so that our appearance and quality are superior to peers. Water absorption rate can be precisely controlled under the national standard (0.5%), stability control at around 0.25%. It can put an end to something bad along with regular use. 2. Walrus Toilet flushing capacity CommodityFlushing pressurewater consumptionThe number of washed-away ping-pong ball (10PCS)Walrus low flush tank 2.5kg6L888Walrus close-coupled closet 2.6kg6L101010 3. The capacity of water: National standard dilution rate should be not less than 100. (Walrus dilution rate is not less than 200.) 4. National standard: The total length of the ink residual traces after each washing should be less than 50mm. (As Walrus can make it less than 45mm even all wash away.) 5. Trap seal and catchment area: National standard height of toilet’s water seal should be not less than 50mm. (Walrus is between 50-70mm, guaranteed the catchment area, saving-water, anti-smelly and splash.) 6. Noise level: National standard high- grade toilet flushing noise shall not exceed 55DB. (Walrus can make it lower than 54 DB.) 7. Conservation of water: