Thermo-CTP-Platte TP-IIN

High Quality Thermal CTP Plate TP-IIN Technical SpecificationPlate Type Positive working, no preheat thermal digital plate, with optionalpostbake for longer runs Application Medium for sheetfed, web offset press Substrate Electro-chemically grained and anodized aluminum Gauge 0.15/0.30 mm Maximum short grain width 1320 mm Spectral sensitivity 800-­850nm Platesettercompatibility All the main brands in market, like Kodak Trendsetter/Lotem/Magnus, Screen PT-R, Heidelberg Topsetter/Suprasetter etc. Laser energy required 120 mJ/cm2- 160 mJ/cm2 ( varies based on platesetter manufacturer and developing condition ) Resolution 1% to 99% @ 200lpi. Dependent upon capability of imaging device. FM capability 20 micron stochastic. Processors Recommended: Glunz&Jensen, Kodak Plate Processors Developer Huaguang TPD-III, Kodak ­Goldstar Premium, IMAF Therm830/One Plus etc. Processing 23°C/30 seconds Run length 100,000 impressions unbaked, over 500,000 impressions baked. Actual run length may vary according to press/paper/ink conditions Safelight Daylight handling Shelf life 12 months, under recommended storage conditions Transport and storage Store plates flat in their packaging, away from excessive cold, heat or high humidity. Recommended condition is: Temperature 10-­26°C & RH between 40­-70%.