Textur Pulverbeschichtung

Textur Pulverbeschichtung

original-Preis: 4,40 USD
Wuhan, China
Produktionskapazität:
30 Tonne / Monat
Wuhan, China
Firma
86-27-83558483
Yincai Liu
Kontaktperson

Basisdaten

Powder Coating of all texture patterns Floating Agent L101 L101 can produce pattern types of art, hammer, orange peel, small and large wrinkles and so on. It can be applied in Epoxy and Polyester powder coatings. Technical data: Appearance: White or yellow powder Melting point: 110 120 Celsius degree Volatile: ≤ 0.3% Specification and Application 1. The product has been composed of coarse and fine powders, the coarse powder is used for the cubic effect, while the fine powder is used for eliminating shrinkage. 2. Add less amount, make larger texture pattern and add more amount if you want to make small texture pattern. Appropriate amount of 2-methylimidazole will get better cubic effect. 3. The curing temperature has little influence on texture size. Dosage: 0.2 0.8% based on total amount of coating formula, directly mixed in post production. L101 can be used for all kinds of thermosetting powder coating. Wrinkling agent L102 L102 can adjust the system viscosity and surface tension of the powder coatings in the melting state, so that the coating surface has the wrinkle, art, texture pattern, etc. Different sizes of pattern through different amount. The production process is simple with one-time extrusion, and no need for secondary molding. It also has the good pattern stability and storage stability. Technical Data Proprotiont: 1.5-1.6 Volatiles (%):≤ 0.3 Specification and Application 1. The fine wrinkle pattern can be achieved by adding very small amount of Sand Textured agent L103. 2. The advantage of this agent is that the dosage is small, clear texture effect can be achieved with little amount . Dosage: 0.2 0.4% based on total amount of coating formula, extruded with the batch. L102 can be used for all kinds of thermosetting powder coating. Do not add leveling agent and benzoin, etc in the substrate powder., the size of pattern varies inversely with the amount. Sand Textured agent L103 L103 can play a role of physical separation, which can be used in all kinds of powder coatings. If adjust the formula to match with organobentonite can produce various types of sand texture patterns with all sizes. The fine sand texture pattern used for aluminum sections can be also achieved, the coatings with L103 has good ability of scratch resistance and hardness degree. Less amount, bigger size of pattern. Technical data Appearance: White powder Melting point: ≥ 320 Celsius degree Volatile content(%): ≤1% Fineness: 5-7 um Specification and Application 1. Do not add leveling agent and benzoin, etc in the substrate powder 2. It can produce fine orange peel pattern if using together with wrinkling agent. 3. No need to use matting agent in glossy sand texture powder coatings. Dosage: 0.2 0.4% based on total amount of coating formula, extruded with the batch. L103 can be used for all kinds of thermosetting powder coating. Hammer Tone Agent L105 Hammer Tone Agent L105 can be interacted with aluminum powder in the melting process so that the pigments start convoluting, and arranged in shape of plates or branches. If L105 is extruded together with resin and filler of aluminum powders, it will get a strong sense of transparency and clear texture lines. Specification and Application 1. The hammer tone effect depends on the resin to a large extent. The appropriate polyester is easy to produce the pattern. 2. The texture pattern will be still very clear even if the amount of the polyester filler is increased to more than 40%. 3. Adding certain amount of surface conditioner L521 or benzoin will also be good for hammer tone, the texture pattern will become larger. Dosage: 0.1-0.3% based on total amount of coating formula, extruded with the batch. L105 can be used for all kinds of thermosetting powder coating. Packaging: Polyethylene lined, multi-ply paper bag, 25kg/bag. Storage conditions: Keep in cool place; keep away from fire. Recommended formulation1.Black sand texturegloss25103itemformulation 1formulation 2formulation 3epoxy20kg20kg20kgpolyester30kg30kg30kgbarium sulfate50kg50kg50kgsand texture agent L1030.1kg0.2kg0.4kgorganobentonite0.5kg1kg1.5kgleveling agent L880.5kg0.5kg0.5kglustre-enhancing agent L7010.5kg0.5kg0.5kggeneral wax powder L5151kg1kg1kgElectricity-enhancing Agent L5010.3kg0.3kg0.3kgblack carbon1kg1kg1kg2.silver gray hammer tone(Epoxy-Polyester Powder Coating) itemformulation 1formulation 2formulation 3epoxy50kg40kg40kgpolyester50kg40kg40kgpure polyester resinappropriateappropriateappropriateL1800 barium sulfateappropriate20kg20kgL718 aluminium powder1.5kg1.5kg1.5kgL515 wax powder0.5kg0.5kg0.5kgL307 benzoin0.5kg0.5kg0.5kgL88 leveling agentappropriateappropriate0.2kgL701appropriateappropriate0.2kgL105 hammer tone agent0.1kg0.1kg0.1kg

Lieferbedingungen und Verpackung

Packaging Detail: polyethylene lined,multi-ply paper bag,25KG/bag. Delivery Detail: 7-30 days
Hafen: shanghai

Zahlungsbedingungen

Telegraphic transfer

Фотографии

    Passwortwiederherstellung
    Um Ihr Passwort wiederherzustellen, geben Sie hier Ihre EMail-Adresse ein, mit der Sie sich bei uns registriert haben:
    Der Code zum Zurücksetzen des Passworts wurde an Ihre E-Mail gesendet.
    Код уже был отправлен Вам ранее.
    Вы можете ввести его в поле выше, или получить новый код через сек.
    Es ist ein Fehler aufgetreten. Bitte überprüfen Sie Ihre EMail-Adresse und versuchen Sie es nochmal.
    Ваш новый пароль:

    Name ist leer


    Выберите страну доставки

    Sie haben keine Nachricht geschrieben

    Durch das Anklicken des Buttons "Abschicken" erklären Sie sich einverstanden, daß Ihre Daten zur Bearbeitung Ihres Anliegens verwendet werden. Weitere Informationen und Widerrufshinweise finden Sie in der Dateschutzerklärung.

    Ihre Nachricht wurde versendet!

    Schließen

    1
    Рынок B2B
    Cancel Close
      Mehr zeigen zuklappen
        Regionsuche
        Weltweit
        Категории
          Produktbezeichnung