TDM-over-IP

Overview IDM-TOP800 TDM over IP converter can transmit 1 16 E1 channels over the IP networks. The device supports framed and unframed E1 channel, and support all of the traditional E1 and IP services, such as voice, data, fax, signaling and the other all kinds of communication service. IDM-TOP800 TDM over IP converter is widely used with WLAN to transmit E1 signals. Features Transmitting framed and unframed E1 signal through IP network E1 Number:1 to 16 channels optional FE Number: 3. (1 of them is electrical, the rest 2 could either be electrical or optical) Low throughput delay Clock Selectable: internal clock, external clock, network adaptable clock or recovered from E1 line Can be configured for N X 64K, or network adaptable to N X 64K QoS guarantee for E1 transmitted on the IP network Easy to configure and use. Transmitted package based on the IP address, through switches, routers network equipment etc General UTP Ethernet interface, 10M/100M auto-negotiation Specifications Power: Power consumption:≤4W AC power: 160-240v DC power: -48V Ethernet Physical port: RJ-45/FC/SC Port rate: 10/100Mbps Full/half duplex Compatible with IEEE802.3 E1 Physical port: RJ45 Input rate range: 2.048Mbps±50ppm Port code: HDB3 Impedance: 120ohm balanced Compatible with: G.703 Environment Operating Temperature: 0 50ºC Operating Relative Humidity: 0 95% Store Temperature: -20 65ºC Store Relative Humidity: 10 95% Size 482mm(W)×430mm(H)×152mm(D) Application Ordering information IDM-TOP801 1E1 over IP/Ethernet IDM-TOP802 2E1 over IP/Ethernet IDM-TOP804 4E1 over IP/Ethernet IDM-TOP808 8E1 over IP/Ethernet IDM-TOP816 16E1 over IP/Ethernet