TD8714B RF Netzwerkanalysator

TD8714B RF NETWORK ANALYZER TD8714B RF Network analyzer is a highly intelligent RF vector network analyzer, widely used in areas such as CATV and Telecommunication. It can speedily and accurately measure Atten, Return Loss, Impedance, Smith chart, VSWR, Group delay, Phase, Gain, frequency response, and etcIts measurement targets transmission, reflection, group delay, phase characteristic of various RF devices including Amplifier, Coaxial Cable, Power Divider, Divider, Antenna, Coupler, Attenuator, Filter, Isolator and etc. Features and Specifications Source Frequency range: 300 KHz 3000MHz Frequency resolution: 1Hz Frequency accuracy:±5ppm(25±5) Harmonics:≤-30dBc(>1 MHz); ≤-20dBc(≤1 MHz); Phase noise:-67dbc/Hz (@ 10 KHz) Impedance: 50Ω or 75Ω Level accuracy: ±1.0dB; ±2.0dB(Opt 1E1) Output Power Range:-5 dBm +10 dBm Directionality:≥40dB Output port: N female External port RS-232,GP-IB,USB print, User TTL, External trigger Physical Specifications Length*Width*Height480mm*430mm*180mm Weight:20.5Kg Power:AC200V±10%,50Hz±5% Power consumption: 150VA Operating Temperature: 0 +40 Network Analyzer Frequency range: 300KHz 3000MHz 10MHz 3000MHz(Opt 1E3) Dynamic range: 100dB(+10 + -90dBm); 50dB(Opt 1E3) Scale resolution:0.01 dB to 20 dB in 0.01 dB IF RBW:15Hz 6.5KHZ Max input power:+10dBm Damage power:+20 dBm, ±25VDC Load match: 20 dB@<1.3GHZ,18 dB@>1.3GHZ Input port:N female Tset channel: 2 CH Tset Type: Transmision, Reflection, Phase, Group delay Display format: Log, Lin, SWR, Delay, Phase, Smith chart, Polar, Real, Imaginary, Impedance magnitude Sweep mode: Continue, Single, Hold Horizontal Data Points:3 1601,selectable Limit line: More horizontal Limit Lines, selectable Marker: 8 markers, display 4 Markers each screen Store and Recall: Store and Recall test Data/Trace in internal disk or USB disk Split display: Up and Down screen for display test trace Display: 10 inch CRT Options: OPT 1E1:60dB Programming Attenuator OPT 1E2:TD1820 50/75Ω impedance transformer OPT 1E3: Widthband Detector OPT 1E4:N-50J Calibration Kit(OPEN,SHORT,LOAD,F/Female connector) OPT 1E5: N-75J Calibration Kit(OPEN,SHORT,LOAD,F/Female connector) OPT 1E6: F-75J Calibration Kit(OPEN,SHORT,LOAD,F/Female connector) OPT 1E7: USB/GPIB Card and software OPT 1E8:TD8714B communication software