TCJ-SXH Bow Maschine

TCJ-SXH Star bow machine/Star-bow machine/Bow machine/Automatic bow machine Feature: The machine is capable to work with plastic - or woven fabric ribbon 8 to 30 mm wide. Bow sizes range from 1.5mm to 4.5 mm in diameter. The ribbon is supplied from spools or rolls which are attached to a rack at the back side of the machine. The carrier band with the adhesive label is supplied from a roll to the winding head area. The ribbon is fed tensionless to the winding head through a compensation roll. Electronic controls combined with modern step motor technology guaranties a continued precise operation. The ribbon is guided in the slidable mounted ribbon guiding system. The supplied material is pushed into the needles of the winding head during the downwards movement of the guiding system. Dependant on the amount of loops the winding head turns a arch, defined by the electronic controls. The ribbon guiding system moves forward again and repeats this cycle until the preset amount of loops is reached. The carrier band with the adhesive label is supplied to the winding head. It is stitched together with the unfinished bow with a staple formed by the stitcher out of wire material during the stapling process. The ribbon is cut and the finished bow is ejected. The cycle starts again and again. Technical Data: Winding heads2MaterialPlastic or woven fabric , Pet, etc. 8-30mm widthPower consumption1.5 kwCore1-2Bow diameter1.5-4.5Bow loops5-30Air pressure6.0 -8.0barMachine weightapprox. 400kgSpace requirement3m³