TCAK Schaltkasten

TCAK control box Welded together by the cold-rolled steel cabinet and durable; after repeated bending of the case mouth to prevent water and debris out of the box into the box .A special sealing strip on the door, with excellent sealing performance; The door molding, with beautiful appearance, high strength; and the door mounting plate can be adjusted according to the depth; cabinet, door, mounting plate pre-ground column M8; cabinet rear mounting holes pre-drilled, no furtheropenings, and with a field wall mounting.This box especially for the installation of various electronic components, control, and wiring.Can be used in industrial power distribution, building electrical control and other fields; also be used as public buildings and industrial areas of the wall or floor-mounted secondary distribution box.Secondary instrument panel and glass door constitute double protection to IP55 level of protection.Accurate installation of modular structure, easy transportation and installation. Standard accessories NameNumberMaterialThickness (mm)Surface treatmentSize descriptionBox1sheet steel1.5nano-powder coating800mm<Box width and height<1200mmDoor1sheet steel2.0nano-poeder coating __Mounting plate1hot galvanied platel2.0 _width and height small 26mm than the box TCAK box Standard accessories introduced NameModelNumberMaterialApplicationLockMS821/MS8301Zinc die casting Lock pieceSingle door1Upper and lower lock fileSingle door/on door2zinc alloy castingAluminum Hinge ---2zinc alloy castingDoor corner reinforcement ---4zinc alloy castingWall pieces ---6high-quality cold-rolled steel plateGround screwm6*182The deduction columnM8*208fixed mounting plateScrewM8*20 hex6A3#barfixed wall piecesScrewM8*20 hex head convex8A3#barfixed mounting plateScrewcountersunk head screw M4*12435#barfixed higeScrewM6*12 hexhead cup 635#barfile4+upper and lower hinge lockScrewTapping screws M5*10135#barfixed in the lock piecesDoor reinforcement fixed homeM612A3#barfixed door bars Slot cabinet with side and with the sealing tape to prevent dust and water into the box to form a protective seal on the box. Sealing strip: polyurethane rubber seals, seal and reliable performance. Mounting plate: for the installation of electrical components. Wall cabinet hole to play back pre-installed wall hole, and with wall pieces, easy to install. Install Multifunctional Article: assembly holes have been welded in the vertical door moldings on both sides, the use of M5 self-tapping screws, easy installation, And enhance the strength of the door. Ground pin: copper nails for box connects to the earth ground