TA-CW / A SERIES INDUSTRIAL WASSERGEKÜHLTE WASSER CHILL

TA-CW/A SERIES INDUSTRIAL WATER CHILLER TA-CW/A series industrial chillers are widely used in plastic industry, food , ultrsonic machine dying and plating industry.These quality, newly designed and easy operated chillers can accurately control various moulds' temperature, accelerate product-molding and decrease precessing cycle. Features: 1.The compressor is use DAIKIN from Japan and the water pump is using Italy, special quite,saving electricity. 2.Exact electronic temperature controller precisely controls the mould temperature from +5°C to +30°C with the deviation of only ±1°C . 3.Stainless steel unit frame and open water-tank are firm,durable and easy to maintain and clean. 4.Timer for auto start and stop. 5.Imported brass tube and refrigerant offer a perfect refrigeration. 6.Apply the scope extensive,control the range of temperature is from 5°C to 99°C .(Cool and hot mould temperature controller) Safety Devices: 1.Safely designed main power switch can switch the unit off in emergency. 2.Chained control circuit. 3.Equipped with phase-sequence protective device, short circuit protective device,over-current protective device,freezing protective device,Hi-Lo pressure switch,water-flow switch,electronic time relay and etc. 4.While the unit detecting any abnormality automatically,the indicator light will turn on and give an alarm. ModelTA-CW50 Chilling capacity power ( KW)136.0 Chilling capacity ( KCal/hr) 116,960 CompressorPower( KW)37.5 Compressor (HP)50 Water PumpPower(KW) 4 Water Pump Flow( HP)5 Water Pump Flow( L/min)400 External DimensionL*W*H(mm)2200*900*2100 Tank Capacity( L)750 N. W.(KG)1300 Pipe system diameter refrigerant water outlet/inlet 3" Pipe system diameter Cooling water outlet/inlet 3"