suspened Decke t bar

1.) Flat ceiling t bar 38# 32# Size: height:32mm 38mm Thickness:0.3mm 0.27mm Wideth:24mm 22mm Length:3600mm 1200mm 600mm and so on. Raw materials:high-quality hot-dipped galvanized steel coil The length and thickness can be produced on customer's request 2.)middle groove line tee grid: 38# 32# Size: height:32mm 38mm Thickness:0.3mm 0.27mm Wideth:24mm 22mm Length:3600mm 1200mm 600mm and so on. Raw materials:high-quality hot-dipped galvanized steel coil The length and thickness can be produced on customer's request. 3.)groove t grid: Model No.: 32# Size: Height:32mm Wideth:24mm 22mm Thickness:0.27mm 0.3mm Wideth:24mm The length:3600mm 1200mm 600mm and so on The secification can be required by the customer. It is used in the hotel,home,bus station,suppermarket,and office building and etc. The detail information of the ceiling tee grid (T-Bar, T-grid) 1.) Be made of hot dip galvanized steel .it is fire tightness , flame retarded,soundproof,anti-aging 2.) The connector by unique design,when you construct the ceiling, it is easy to install and not to be losened or to be detached each part.. 3.) It is also can be removed and reused without being damaged or without the use of tools. 4.) Its suspension holes punched on the main tee and cross tee in order to increase the durability and safety of the lay-in grid suspended ceiling system. Installation steps: 1.) Determine the requirment ceiling level,mark the position and fix wall angle on the wall. 2.) Hang main tee with T-bar suspension hook. 3.) Insert cross tee to the main tee. 4.) Cross tee adjacent to wall angle light fittings 5.) Adjust the levels and alignments throughout the entire grid system accurately 6.) Install PVC gypsum ceiling tile or othermaterials ceiling panel.