Strainer-Extruder

This machine is applied tofilter the foreign material and metal from gelled material before it enters the calender machine to ensure the safety of the calender machine. During the extruding process, the material is mixed by the screw to help evenly gel; the material can also be heated and kept warm to stabilize the producing process. Patened design of extruding screw to avoid distortion and quiescent load on discharge end in order to prevent decompose of raw-material.Gelled material is filtered by honeycomb pannel to avoid pressure is centralized. And it is more convenient and efficiency to clean upby air-pressure.When the machine is stopped, the die head can be opened by manually controlled oil pump.The gear box is closely sealed; lubricating oil is forced to circulate. Main Technical Information:Model No.Extruder CapacityDiameter of ScrewDia. per LengthSpanning SpeedMain MotorSTR8.5"1000∼1500kg/hr215mm1 : 4.50 - 60rpm75kw DC motorSTR10"1500∼2000kg/hr250mm1 : 5.450 - 48.9rpm110kw DC motorSTR12"2000∼3000kg/hr300mm1 : 5.50 - 42rpm150kw DC motorSTR13"2000∼3000kg/hr355mm1 : 5.450 - 40.2rpm185kw DC motorSTR16"Max. 4500kg/hr410mm1 : 5.00 - 45rpm220kw DC motorSTR18"Max. 4800kg/hr460mm1 : 5.00 - 45rpm345kw DC motor