Statorkern Tester / Prüfgeräte

ATS-300MStator Core Magnetic parameters Tester 1.Tester Introduction ATS-300MStator core Magnetic parameters Tester is apply in measuring stator core of Motor(silicon steel), iron core of industrial frequency transformer, finished transformer, amorphous, ultracrystallite and permalloy iron core ( close loop sample) under the condition of frequency 50Hz and 60Hzs dynamic hysteresis loop, magnetizing curve and power loss curve. Accurate measurement of magnetic core amplitude permeability μa, loss angel δ, specific total loss Ps, remanence Br, coercive force Hc and other dynamic magnetic characteristic parameters. Equipment has powerful data processing and memory property and adopted thread integration techniques in embedded system. It use the high speed microprocessor, highly integrated the excitation control, data acquisition, data processing and other unit. 2. Main features Output is sine wave, output distortion is very low and nothing to do with the load, ensure the accuracy of the test result. Excitation power supply and current are both multi-range automatic output, it could automatically select the output range according to the test samples and number of turns, ensure the accuracy of the test result. Adopt 32-bit embedded high speed processor, with powerful function of data processing. It could test one point or multi-point ( when single-machine operation ), testing average time of one point is about 12 seconds. Test for hot rolling, cold rolling and non-oriented silicon steel iron core, permalloy, amorphous and such soft magnet core. Test sample shape: toroid, E shape, U shape and such close-circuit samples. Support the result-sorting, simple operation, well suitable for field measurement. Adopt 320×240 big screen LCD which could show all kinds of waves, curves and test results. Support USB2.0 HOST interfaceit could connect with U disk, use U disk to store a lot. Support RS232 interface, which could connect with PC to be the test system ( Optional SM Windows test software), with more function. 3. Software function SMtest test software runs on Windows 95/98, Windows 2000/XP operating system and conform to Windows software standard, simple operation. SMTest has three main functions: test function, file operation and printout. Select fix B (magnetic induction lock) or fix H (magnetic field lock) to test, meet kinds of test requests. Full-automatic control and intelligentized judgement, the whole test process is auto-completed. Real-time monitor of the sampling waveform and equipment condition during the test process and could stop at any time. Based on the samplesexternal dimensions, it could calculate the effective sectional area and effective magnetic path length. The file system adopt the database mode, it could directly print or output the test result into Excel form. Powerful function of file management: data storage, deletion, clear out. Data file include complete sampling data, samples data, equipment parameters and test projects. Files are test formatting, convenient to input into other softwares. It could show I(t)U(t)B(t) sampling waveform and B(H) hysteresis loop , also show the coordinate information of every points on the curves. After the multi-point cluster, it could show the cluster of B(H) magnetizing curve, μa(H) permeability curve and Ps(B) power loss curve and also show the coordinate information of every points on the curves. Make different test conditions B(H) magnetizing curve and Ps(B) power loss curve into one graph, convenient for their comparison and analysis. Based on μa, Ps, Bm, Br, Hc and Hm parameters to set up the bound, to qualify the test result through the colors of the data form. Support all kinds of printer, test result accurately match with the printer paper. Equipment has the function of print preview, convenient for adjusting the size and edge distance of the test report. Directly print the test report, or turn the report into JPG picture file. Send the JPG picture file by E-mail or save it in disk. Test report include complete curve graph, test results, test condition and samples parameters. With optional Chinese and English edition, convenient for add the User logo and name of enterprises. Kinds of unit standard optional, to make sure the every customers using habit. 4. Hardware parameters System ParametersExcitation Power Supply Processor: 32-bit ARM embedded high speed processor Outer storage: U disk storage, compatible for kinds of U disk, with 4G capacity or more, it could save 100,000 pieces of data. Interface: RS232,USB2.0 HOST(connect with U disk) Display: 320×240 lattice, 5.7 inch LCD screen Output power: 300VA, sine wave,frequency: 50Hz-1000Hz Frequency Error: Set value within ±0.05 Output voltage: 0-10-50-80-100V(Effective value) Output current: 0-30-300-3000-30000mA(Peak value) Voltage Distortion: superior to 0.5% Voltage Stability: superior to 0.2% Signal produce way: DDS digital frequency Integration way Data sampling A/D Convertion: Dual Channel, successive approximation converter Voltage Sampling: 0-3-30-300 V( Peak value ) Current Sampling : 0-30-300-3000-30000 mA 5. Measurement Accuracy(warm-up for half an hour; temperature: 23±5°c, circumstance humidity 30 75% RH,no outside magnetic field interrupted ) Test parametersLock Accuracy Magnetic Induction: Bm±0.3% Magnetic Field Strength: Hm±0.5% Measurement Accuracy Magnetic InductionB:±(0.3+0.1×(Vf/Vr-1)) (Vf: Induction voltage sampling gear full range value, Vr: Induction voltage measuring peak value) (Vf/Vr-1) ≤2 (30V300V voltage sampling gear) Magnetic InductionH:±(0.3+0.1×(If/Ir-1)) (If: Excitation current sampling gear full range value, Ir: Excitation current measuring peak value) (If/Ir-1) ≤2 (300mA3000mA30000mA current sampling gear ) Specific total loss Ps±(1.0+ (Φ/90°)×0.25×tan(Φ)) (Φ: Induction voltage and excitation current s phase angle.) 6. Configuration List No.Product nameModelQuantity1Statorcore Magnetic parameters testerATS-300M1Set2Gilding test clip1Set 3PC connection lineRS2321Set 4Power line1Set5SoftwareSMTest1Set6Standard sampletoroid1Set