Stark Steinkleber

Strongly stone adhesive,stone adhesive,stone grout Features: 1, Green environmental protection, non-toxic, no peculiar smell 2, Good waterproof and anti-aging property 3, Thin-layer construction, reduce the dosage, fast and convenient 4, Low shrinkage, no hollowing, characterized anti-sag property 5, Characterized anti-permeability capacity, avoid gaps in bricks 6, Strong bonding strength and flexibility, and can avoid the alkaline ingredients in the adhesive to penetrate into the stone, leading the surface of stone disease Scope: Applied to past marble, granite, sandstone, large tiles, etc in indoor wall Requirements of base level 1, The paint surface should be rough chiseled, at least 80% of the original surface exposed 2, Substrates with large water absorption, high temperature or the base level is dry, the base level should be wet by water before constructed 3, The base level should be smooth, clean, firm, no dust, stagnant water, grease or other loose materials Attentions: 1, The products should be used in 5-40°C 2, Forbid mixing water with dry mortar to reuse 3, Entering of filling after constructed for 24 hours 4, Confirm the verticality and flatness of the base level before constructed 5, The stone should be pasted in 10 minutes after the base level was pasted with stone adhesive 6, Any adjustment due to misplace after the stone pasted, should adjust in 10 minutes to avoid affecting the strength