Standby-Energiesparmodus

Standby Power saver,Standby killer,Master-slavesocket Device: Features: Saving Energy A: Standby power saver for electronic products B: Low standby power consumption Saving Money: A: Electricty fee saving by shutting down standby power of electronic products B: Pay bak itself within the first few months of usage C: Prolong the electronic life cycle Environment Protection: A: Decrease CO2 emissions Saftey A: Protect electronic products form transient high voltage causing by thunder strikes or surge B: Reduce the fire risk by total cutting power to electronic products not in use Convenience: A: Ease of installation and use B:With a standby power saver socket and and AC power Extension socket, The extension socket is for electronic product that is not suitable for standby power saver. Technical features: 250V,50Hz,10A,2300W,IP20 Class I,non-rewirable, 4 Way power saver socket,1 master,3 slave sockets How to use: Examine the wall socket: A: If the wall socket is a flush one, just plug the product on to the wall socket B: If the wall socket is a raised one, insert the two back supports into the holes in the back of the plug.adjust the length (40to 45mm) of the supports till the length is equal to the distance prom the back of the plug to the wall.then lug it on the wall socket. Plug TV/PC into the “Master” socketPut all the relative equipments power plug into the “slave”socket (eg.DVD,Montior,printer,Modem ,etc).These equipments will be under “Master “Control.When you use the remote controller turn off the TV, All the equipments in “slave” socket will be turned off automatically. When TV turn on, all the equipments in “slave”socket will be turned on automatically, In this way, you can save the power and environment protectionIf you buy the product with surge protector, the green surge protection light will light , it means all the sockets on it are surge protected. When the green light is off, it means the surge protection is not working. This means that any devices plugged into the T-socket adaptor will not be protected from surges or spikes in the supply.