Ständerbohrmaschine

The double working position upright drilling machine is a high efficiency and high precision glass processing equipment. The glass sheet being put on driving belt, is drilled from front and rear of glass sheet by two groups of drill bits. · Feature 1. High efficiency The operation of glass feeding at cross direction and drill bit moving upward and downward is performed speedily, the drill main shaft can rotate at speed up to 3360 r / min, and the two groups of drill bits can operate simultaneously. 2. High precision The glass feeding at cross direction and drill bit moving upward and downward are controlled by servo motor and automatic control system, the main driving is tooth belt and ball bearing lead screw, and drill frame is fixed on straight line guiding rail, the processing of all components and parts and assembling precision is higher than National Standard. 3. Simple operation Due to humanizing of operation interface, data inputting is more speedily and conveniently. 4. Reliable and safety performance The system is equipped with safety provision, so as to secure fault free operation. ·Main parameters 1.Glass processing specification Width:600 5000 mmHeight:150 2500 mm 2.Glass processing thickness :4 25 mm 3.Hole processing range:Φ 4 Φ50 mm 4.Total power: 8 Kw 5.Equipment externals: 7140(L)X2005(W)X4200(H) mm 6. Total weight:appr. 1508 Kg 7.Processing accuracy: Hole pitch accuracy ≤0.3 mm/m Hole dimension accuracy ≤0.2 mm 8.Air supply pressure:0.6 0.8 Mp 9.Glass clamping force: 8 10 Kgf 10. Rotation speed of main shaft:280 3360 r / min 11.Down-pressure of main shaft:2 8 Kgf