Sprühtrocknen Polyaluminiumchlorid

The detailed description [English name] Polyaluminium Chloride, the abbreviation is PAC [molecular formula] [AL2(OH)LnCL6-n]m [technical standard] the product quality conforms to the national GB15892-2003 Characteristics 1,The characters of spray-drying poly aluminum chloridedepend the working principle of pressure atomizer. 2,As the pressure-type spray dried product is derived from particle-like or hollow porous particle form, using pressure-type spray-drying, multi-purpose to obtain the granulated product obtained granulated product has excellent performance and mobility performance of dust. 3,Between product and water due to the larger contact area, so wetting properties than the powdered product is good, clean water, the rate was significantly higher than powder products, by the pressure type spray dried product has a unique characteristics, So deeply user high praise. Performance 1,Spray granulation is dried poly aluminum chloride was atomized into tiny particles at the same time, this particle formulations have good application performance. 2,Poly aluminum chloride is a water-soluble substances, has good thermal stability and high solubility, in the drying process will be 40% -50% solid content of poly-aluminum chloride solution, the introduction of high-pressure pump, through pressure entered the dryer in the nebulizer for atomization, scattered into a tiny droplet, the droplet was obtained after drying granular products that enable the completion of drying and granulating at the same time