Spektrumanalysator SM-5011

SM5011 is equipped with a tracing signal generator, and in the combined use of spectrum analyzer/tracing signal generator. it can complete the work which cannot be done by other frequency sweep system, such as sweep generator/network analyzer, sweep generator/spectrum analyzer, and sweep generator/oscilloscope, etc. Input frequency response0.15-1050MHz, 3dBDisplay accuracy of central frequency+/-200KHz (frequency sweep width +200KHz)Accuracy of mark frequency+/-0.1% (frequency sweep width +100KHz)Frequency display resolution100KHz (4½ bit LED display)Frequency sweep width0.1MHz/div-100KHz/div with 1, 2 and 5 step system And 0Hz/div (0 frequency sweep) Accuracy: +/-10% (each range)Intermediate frequency bandwidth20KHz and 400KHzVideo filter(When on) 4KHzAmplitude range-107 +13dBReference level-27dB +13dB (10dB for every step) +/-2dBAverage noise level-97dB(20KHz intermediate frequency width)Display range of CRT screen80 dB(10dB/div)Display range of vertical display+/-2dB (2 With attenuator) 250MHz signalInput attenuator0-40dB (4x10dB step) error: +/-1dB/10dBMaximum input level+10dBm,+25V DC(Input attenuator set at 0dB) +20dBm (input attenuator set at 40dB)Frequency stabilityOver 150KHz/hourInput jack typeBNCInput impedance50ΩPower supply220V/110V; +/-10%; 50Hz/60HzTracing signal generatorInput frequency response0.15-1050MHz, 3dBOutput level range-50 +1dBm (4x10dB) +/-3dBOutput attenuator0-40dB (4x10dB step) error: +/-1dB/10dBInput jack typeBNCInput impedance50ΩOthersDC output+6V (for probe)AM demodulation outputLoad impedance ≥16Ω