Spektrometer

1,SPEC300 VIS Testing Spectrometer It adopts international advanced full-spectrum method, meeting the requirements of IEC and relevant national standard, measures the the spectral power distribution, chromaticity coordinates, color temperature, color rendering index, color difference, color shift, color purity of variouslamp and monitoring devices as well as the parameters such as dominant wavelength, luminous flux, radiation power, light efficiency; the RS-232C standard interface is for easy connection to various computers, standard Chinese and English operation interface, meeting the requirements of internationalization. The parameters of the tested object, such as voltage, current, power, power factor etc can be tested at the same time when it is equipped with corresponding instruments. The test software is beautiful and easy to use, the tested data and analyzed result can introduce to the reports in various formats such as Excel, PDF. Spectral range: 380nm 780nmMeasuring Devices: high-sensitivity photomultiplier tubes imported from JapanWavelength accuracy: 0.2nmWavelength repeatability: 0.1nmphotometric linearity: 0.5%Color temperature range: 1500K 30000Kcolor coordinates accuracy: 0.0003 (standard light source) 2,Optical Fiber It is for connecting the SPEC300 Spectrometer and integrating sphere, conducting the tested light from the sphere to SPEC300. 3,Photometry Integrating Spheres Integrating Spheres are used for creating the test environment of Light flux, meeting the requirements of CIE pub.NO.84(1989). Fine diffuse reflection. Reflectance ρ≈0.8. 4, UI2008 Digital Electrical Parameter For measuring the electric performance parameters of light sources, measuring the voltage, current, power and power factor. Features: measuring the voltage, current, power and power factor Voltage Range: 10 600V Current Range: 0.005 20.00A Automatically converted range Accuracy: ± (0.4% reading +0.1% range +1 digit) 5,100W Standard Light source The continuous spectral power distribution data of 380nm 780nm visible light, for calibrating the spectrum testing instrument. 6,500W AC Power Source Provide the tested light source with a stable and reliable power supply environment 1. Input: Single-phase 220V ± 10% 50Hz ± 5% 2. Output: single-phase Output Voltage: AC 0-300 V, Output Frequency: 45-65HZ Output waveform: sine wave Waveform distortion: ≤0.3% Frequency stability: ≤ 0.05% Load voltage regulation: ≤ 0.1% Overload capacity: alarm immediately when it is over 110% Adaptive load: resistive, inductive and rectifier load (the volume shall be reduced for inductive and rectifier loads) 3. Display function: voltage, current, frequency, power 4. Working environment: Temperature: 0 40 °C, Relative humidity: 0 90% 7, Cabinets For installing the test equipment such as spectrometer, power supply, electrical parameter tester, DYJ and so on , and providing a safe power distribution device. It makes the photoelectric light source color test equipment a perfect integrity, beautiful, grand, safe and easy to use.