Sicherheitsgurt Gurt

Safety harness belt is fall prevention tool for workers operation in the high air. It consists of webbings, lanyard and metallic fittings, generally know as safety belt.1. TypeElectrician safety belt Full body safety belt Fall prevention safety belt 2. The application and characteristics of product Electrician safety belt: it is fit for electrician, telecom worker and garden worker to operate on pole. Full body safety belt: it is fit for operation of climb and activity. It plays a role of fall prevention in the course of climbing. It is simple and convenient to use. Moreover, it is safe and reliable. It is fit for the person with the stature of more than 150cm to use. Its length can be product as per customers requirement. High strength, abrasion resistance, mould resistance and long tenure. 3. Technology parameters The capacity which electrician safety belt and full body safety belt can assume is more than 24515 KN. The breaking strength of fall prevention safety belt is more than 1961.2N and of its component energy absorber is more than 24515N. The breaking strength of lanyard is more than 29418N. The breaking strengths of metallic fittings are all more than 29418N, their hardness 40°or so. 4. Usage and maintenance When purchase and use safety belt, should inspect whether it is whole for components of safety belt and damaged. The loop of metallic fittings should not be welded and keep the edge smooth. When using electrician safety belt, the protective sleeve on post lanyard is not allowed to draw on the ground by holding the lanyard so as not to damage the sleeve and affect the main lanyards. Full body safety belts should not be hanged at lower place but operating person lies at the higher place. While using safety belt, should not allowed to be knotted. When using the long lanyard singly with the length of more than 3m, should consider adopting complementing measurements, for example, add lock hook, buffer or controlling fitting on the lanyard. Prior to each use, should make one inspection of appearance. In the course of use, should also look it up. Should test it for one time in half a year or one, subject to it that the main components are not damaged. If the damaging or deteriorating arises, should indicate the cases and stop using so as to ensure to operate safely.