Schrägsitzventile

Angle seat valves ModelKLJZF Series DIN15-50Name:Angle seat valve with burkert 2002 construction2/2-way pneumatic operated angle-seat valves Feature: 1.Media:neutral and aggressive liquids and gases 2.Medium Temperature: -10 +180,PTFE SEAL 3.316 Stainless steel valve body 4.Externalpilot ensure long service life. 5.The self-adjusting gland improves the sealing performance. 6. Large flow,fast response. Technology Parameter Model Pipe Connection Kv Value Max.Pressure Resistance Min.pressure Resistance Performe Sizemm direction of flow polyamide Aluminum alloy KLJZF-15 G1/2 4.2 0 1.6 0.39 50 A OR B KLJZF-20 G3/4 8 0 1.1 0.39 50 KLJZF-25 G1 19 0 1.1 0.42 63 KLJZF-32 G11/4 27.5 0 1.5 0.5 63 100 KLJZF-40 G11/2 42 0 1.25 0.44 63 100 KLJZF-50 G2 55 0 1.0 0.4 125 Installation & Maintenance: 1 Clean the pipes carefully from any residue, dribble or welding residue, to avoid any damage to the seal. 2 To be installed as required, preferably with actuator in upright position 3 Connect the pipes according to the reference points (fl ow direction) found on the valve body.Only disassemble the actuator if required by customer. 4 Before taking the valve apart, depressurize the media supply and pilot air supply piping system. Notice: DirectionA and fl owbelow the seat 1,Valves with DirectionA and fl ow directionbelow the seat ensure long service life. 2,Valves used for liquid media are waterhammer-free. 3,Valves with orifi ce DN15/DN20/DN25 are ideal for the operationg pressure of 0.3Mpa. vavles with orifice DN32/DN40 are operated with double-acting actuators DN100. Valves with orifi ce DN50 are operated with double-acting actuators DN125. DirectionB and fl ow above the seat Valves with DirectionB provide high sealing integrity, used for steam and gases media. there is a danger of waterhammer ,When the valves used for liquid media.