Schneid Rule (Regel Schneidklingen)

Cutting Rule (rule,cutting blades) Cutting rule: good hardness and good flexibility Creasing rule: very hard in body and accurate in height, can be double side round and 1 side flat,1 side round Perforating rule: 4TPI, 8TPI, 12TPI,16TPI Wave rule: 8WPI, 12WPI, 16WPI, Hardened edge Cut-Crease rule: according to client's requirement Zipper rule, as per Sandvik's specification ItemCommodity Name1Ordinary Cutting Rule 23.80 x 0.71 x 1000mm (42 or 30 degree) edge, body both 38HRC2HARDENED Cutting Rule 23.80 x 0.71 x 1000mm, edge 56HRC, body 38HRC3Creasing Rule 23.30 x 0.71 x 1000mm Height can be decided by the clients4Ordinary High Speed Cutting rule 23.80 x 0.71 x 1000mm Bi-blade, edge and body both 38HRC5HARDENED High-Speed Cutting Rule 23.80 x 0.71 x 1000mm Bi-blade, edge 56HRC, body 38HRC6Perforating Rule 23.80 x 0.71 x 1000mm 4, 5, 6, 7, 8, 9,10,12,16 teeth per inch (client can decide teeth length and space length)7Ordinary Cutting Rule 23.80 x 3pt x 1000mm (42 or 30 degree) edge, body both 38HRC8HARDENED Cutting Rule 23.80 x 3pt x 1000mm, edge 56HRC, body 38HRC9Ordinary High Speed Cutting rule 23.80 x 3pt x 1000mm Bi-blade, edge and body both 38HRC10HARDENED High-Speed Cutting Rule 23.80 x 3PT x 1000mm Bi-blade, edge 56HRC, body 38HRC11Creasing Rule 22.80 x 4pt x 1000mm12Label Cutting Rule 8 x 0.45 x 1000mm13Wave (Corrugated) Rule 23.80 x 0.71 x 1000mm 6, 8, 10, 12 teeth per inch14Glue Flap Perforating Rule 23.80 x 0.71 x 1000mm 15. Cut and Creaser Rule 16. Zipper rule