Schlaf Verstellmechanismus

1. The ottoman adopts the design of wide heavy gauge links and built-in articulating elevated mid-ottoman.Profile shape designed for safety and appearance without pinch points. Articulating designs allows use of wider & higher mid-ottoman for elimination of entrapment areas and for leg support. 2. The system adopts thegeometricallybalanced design to balance chair operation. The user can choose any position from sitting to full reclining. 3. The system uses direct drive with double locks. The direct drive with double over- center locks enables maximum synchronization of side positive locking of both sides. Square drive tube connects to and controls both left and right sides. Ottoman is locked closed on both sides. 4. Minimum stack-up design. The adoption of the flatter links and wider base mounting points enables greater bending resistance and greater stability and strength.It improves weight capacity and durability.The mechanism base width is closer to seat width while maintaining sufficient clearance between links to eliminate possibility of interference. 5. Flanged links for stabilizer tubes. Set up the maximum strength stability and is side to side. It eliminates problems with flexing and breaking of tubes end at bend. Flange is on heavy gauge link instead of the lighter gauge tube which can flex and break. 6. Large diameter cross tubes are usedinstead of formedstraps makes the system obtaining the maximum strength, side to side stability and torque control. Unique design of flattened tube end maximizes torsional strength unlike non-tubular cross members which have no significant torsional strength. 7. The system uses the extended life rivet joints design. All rivet joints have either acetal or bronze rivet bushing and acetal spacers to eliminate any steel to steel contact. No metal to metal noises when links contact nylon stop pins. 8. Safety features. Footrest bracket is spring loaded at all four corners which allows the footrest to pull away from the seat and arm stumps if something becomes trapped upon closing. Hand wand can be easily and quickly removed when not in use to prevent children from operating chairs. 7 second cycle time with smooth operation. Transformer is movable to a safe place to eliminate safety hazards of high voltage to the chair. 9. Interchangeable on wood frame design.The wood frames designed for the rocker recliner, motorized lift are all interchangeable. 10.The back of the chair a dopts the KD sleeve design for easy packaging and installation.