Sauerstoff-Gasgenerator

oxygen gas generator 1. working principles: RD series oxygen generators are based on the PSA principles using high quality zeolite molecular sieve as adsorbent to get oxygen from the air in certain pressure. The compressed air is pressed and Decompressed desorption in the absorber adsorption after purifying and drying. Due to the aerodynamics effect, nitrogen in the zeolite molecular sieve pore diffuse more quickly than oxygen, oxygen is adsorbed by zeolite molecular sieve priority, oxygen enrichment in gas phase to form oxygen products. And then after decompression to atmospheric pressure, sorbents achieve regeneration by adsorption and desorption of nitrogen and other impurities. Usually there are two adsorption Towers in the system, one is used to adsorb and produce oxygen the other is used to adsorb and regenerate. Through the PLC controller controls the pneumatic valve open and close to keep alternating between the two towers, then we can achieve the purpose of getting continuous production of high-quality oxygen. The whole system consists of the following parts: compressed air components, air tanks, oxygen and nitrogen separator, oxygen buffer tank oxygen gas generator 2. Technical index: Oxygen capacity: 3-300Nm3/h Purity: 91%-95% Outlet pressure: 0.2-0.3Mpa (adjustable) oxygen gas generator 3. Features: 3.1 quick and convenient start and stop 3.2 low investment and energy consumption 3.3 high automation 3.4 simple operation and maintenance 3.5 short installation period and small ground treatment workload RDO Model Oxygen capacity (Nm3/h) Purity Pressure (Mpa) Consumption (Nm3/min)0.6 (Mpa) RDO-3 3 93%--95% 0.2—0.3Mpa 0.95 RDO-6 6 1.9 RDO-10 10 2.8 RDO-20 20 5.6 RDO-30 30 8.4 RDO-50 50 14 RDO-60 60 16.8 RDO-80 80 22.4 RDO-100 100 28.4 RDO-150 150 42.0 RDO-200 200 56.0