Rollfahrwerk

APPLICATION The geared trolley is hand operated by pulling the hand-chain and the plain trolley by pushing the load lifted, running on the bottom flange of monorail. Attach the chain block under the trolley to form a trolley type chain block, they may be mounted on monorail overhead conveying system with straight line or curve, hand traveling cram and jib crane. They are suitable for use widely in factories , mines , wharves, docks, warehouse and engine room for installation of equipments as well as for conveyance of goods. It is especially advantageous for use at the places where no power supply is available and for maintenance and repair of equipments. FEATURES Safe in operation, minimum in maintenance.Compact in construction and minimum dimension for installation. To meet the requirements in use, wheel distance between flanges can be easily adjusted according to the width of monorail.As bearings are mounted on the wheel axle, the trolley are high efficiency in operation with small hand push/pull force.Adopt the special wheel hub surface, the trolleys are apt to run on the flat surface and slant surface with inclination 1:6 and below.The wheels are designed with flanges, the trolleys can run on curved I-beam with smaller radius. CST-PLAIN TROLLEY SPECIFIATIONS Model CST0.5CST1CST2CST3CST5CST10Rated capacity t 0.5123510Test load kN 7.3514.7129.42*44.1361.29122.58Min radius of curve m 0.91.01.11.31.41.7Dimensions mm A254318333357368405B184220254293322389C195239286336393500H110135161185220280F’≈3I-beam recommended GB706-88 M mm64 15264 20388 203102 203114 203125 203Emin mm1210.59131523Net weight kg 7142134.54888.5Gross weight kg 7.514.521.54560107Packing measurement(L*W*H) cm 29*13*1936*14*2236*16*2550*40*3250*40*3660*50*46Remarks: As our product is incessantly being improved and developed its construction may be slightly different from this instruction.