Rockwell-Härteprüfer

Features Attracted to iron or steel surface by magnetic force; only one side of the workpiece needs to be reached. The test principle and accuracy comply to standard ISO6508 and ASTM E110. Tested by ational Institute of Metrology with tolorance 1.5HRC, equivalent to bench hardness tester. Quick test, easy operation, good repeatability, high accuracy, no sampling required. Tests workpieces of any shape and dimension only if there is enough flat or cylindrical surface to fix the tester. Tests horizontally, slantingly and vertically. Used to accurately test the hardness of steel plate, steel pipe, shaft, mould, tube, pressure vessel, large workpieces and assembled parts, especially welding line and heat affected zone. The test surface of PHR-100x is small enough to test the hardness of small machine guide rails. Used for production inspection and acceptance inspection, replacing Leeb hardness testers with lower precision. Traceable standard hardness block. Indenter inspected with standard Rockwell hardness tester. Test force calibrated with load cells directly traceable to national secondary benchmark. Main Technical Parameters Initial Test Force:10 kgRockwelll Test Force:60 kg, 100 kg or 150 kgIndenter:120°diamond cone1.588mm carbide ballForce Applying Method:by screwMaximum Magnetic Force:>350kgTest Range :Rockwell hardness HRC, HRB, HRA etc. 15 scalesResolution:Rockwell hardness 0.5HRAccuracy:Meets the requirements of ISO6508Minimum Specimen Size:60×180 mmNet Weight:4.9kgPackage Gross Weight:7.4kg Standard Package: Tester 120°diamond cone indenter 1.588mm carbide ball indenter 3 Rockwell test blocks V anvil (with adapter screws ) Magnifier Base for standard test block Carrying case Optional: 120°diamond cone indenter 1.588mm, 3.175mm carbide ball indenter 6.35mm, 12.7mm steel ball indenter Rockwell test blocks (HRA, HRC-High, HRC-Medium, HRC-Low, HRB) Customized adapter (for testing cylindrical specimen from 50mm to100mm) Model Selection: Model Opening Size (mm×mm)Net Weight kgPackage Gross Weight kgPackage Dimensionsmm×mm×mmPHR-100Flat surface 60*180 Cylinder diameter 100 4.910.0480×390×210PHR-100XFlat surface 20*180 Cylinder diameter 505.510.8480×390×210Remarks: Customized adapters are available for testing cylindrical specimens with smaller diameter.