RFID Wiederaufladbare Aktiver Tag

DVL-AJ16 RFID rechargeable Active Tag Technical Parameter of DVL-AJ16 RFID rechargeable Active Tag 1. Receiving Frequency of RFID active tag: 38K 2. Sending Frequency of RFID active tag: 433M 3. Working Voltage of RFID active tag: 2.8V 4.5V direct current 4. Working Temperature of RFID active tag: -40°C 85°C 5. Dimension of DVL-AJ16 RFID Lithium Active Tag: 90*45*6(mm) 6. Standby Current of RFID active tag: less than 12 uA 7. Sending Power of RFID active tag: less than 0.1mW Performance Characteristics of DVL-AJ16 RFID rechargeable Active Tag 1. Identification Distance of RFID active tag: More than 10 meters under the condition of penetrating thecars’ anti-explosion film; 2. RFID tag Battery Life: Lithium battery which can be recharged repeatedly and can be used for 5 years at least; 3. Password Management: This RFIDactive tagcan be authorized and encrypted by the specific card issuer and cannot be blended after encryption; 4. Identification Angle of RFIDactive tag: 60 degree sector zone; 5. Working Mode: Standby, small current 6. High Anti-light: Import receiving head and modulation signal processing without interference from the sunlight. Operation Instruction of DVL-AJ16 RFID rechargeable Active Tag Before using the DVL-AJ16 RFID rechargeableLithium Active Tag, please encrypt it by the RFID card issuer and authorize it by the software. 1. This RFID active tag uses optical excitation power-saving working mode. Please put the RFID tag's activated window towards the RFIDreader when use it; 2. ThisRFID tag uses lithium battery which is rechargeable. If you find theRFID tagreading is insensitive or the reading distance becomes near, please connect it to PC to charge it for about 2 hours; 3. This RFID tag is used with special holder. Please refer to the installation method to fix it. If you don’t use theRFID tag for a long time, please remove it and put RFIDtag in the shade.