Regler

Model No.:DL-CS2003 Description:wireless led controller Product Detail:DL-CS2003 is wireless switch controller. It adopts micro-processor to do the intelligent control, It is widely used in the field of garage door, lighting, curtain remote control. It has the feature of simply assembling, easy to use and reliable performance. 1. Application:Wireless control for Garage gate, home-appliances switch.2. Technical specification:Operating voltage: 12VDC Standby current: ≤7mA Control voltage and current: 7A 240VAC | 10A 24VDC Modulate mode: ASK Operating frequency: 315MHz, 433.92MHz, customized frequency available Control mode: Latch & unlatch No. of relay: two channels (the two channels will affect each other) Code: PT2260 (fixed code), FP527 (learning code), HCS301 (rolling code) 3. Pins and wiring specification4. Notes for usagea. Not to press the button on the remote too fast and frequently, as the wireless receiving controller adopts MCU to control, it will take 1 second to respond each operation.b.If the LED on the remote becomes fade, or the transmit range become short, pls change the battery in time. (Kindly reminder: in order to keep the environment, pls don’t abandon the used battery freely)c. The installation of the antenna is extremely important. There is antenna input and GND indication on receiving controller. Wrong connection is not allowed.d. The remote is made in precise electronic, so pls keep away from hard falling and water, or it will affect the usage.e. Pls use single bore wire for the antenna, the length reference of 30 cm for 315Mhz, and 25 cm for 433.92Mhz.f. Pls clearly indicate latch or unlatch, or it will affect your usage.g. Pls choose the correct operating voltage, or it will damage the module, even endanger the human life.h. The bearing power could not exceed contact capacity. The correct operation is the bearing power should be 70% of contact capacity.