Regenerative Desoxidation

Regenerative deoxidationProduct presentation Regenerative deoxidation tube, can eliminate the impurity oxygen ,water and carbon dioxide from Nitrogen ,hydrogen oxygen and other air in the room temperature. This kind of Regenerative Deoxidation tube is novelty in appearance , all adopt stainless steel ,set up a window to observe the lose efficiency degree . It can be regenerated in the tube . Feed Gas index : Flow rate : ≤1nm/hr O2≤1000ppm Pressure: ≤0.5MPa H2O≤-20°C The standard of exit gas: O2≤0.1ppm Detailed specification : the deoxidation tube is filled high efficient deoxidant ,the residual oxygen concentration can reach 0.01ppm at least in the air current after purified .The tube body is made of stainless steel tube, high pressure resistant ,the highest pressure resistant can reach 1.5MPa,the filled material is large ,and it’s large volume for deoxidation ,simply regenerate ,it’s difficult to be broken , it’s safe and steady on the usage.The oxygen concentration of the feed gas is 1000MPa ,each tube can absorb 5000ml oxygen( on the standard condition )The flow rate is 10L/min, tube pressure reduce to 0.08MPa.it’s must be combined with stainless steel tube and copper tube with the dimensionφ6 φ10our company produce high efficient gas deoxidation , high efficient purity instrument ,high pure and supper pure gas purity instrument ,402 high efficient deoxidant ,HC-1 deoxidation catalyzer ,OC-2 and OC-3 dealkylation catalyzer ,high intensity molecular sieve ,special gas adsorbent .