PS-816 Foam Kleber

PS-816 Solvent Pressure-sensitive Acrylic AdhesiveFor Foam, Metal Materials Feature: PS-816 Solvent pressure sensitive Adhesive is of self-bridge solvent acrylic resin. The adhesive can bridge under room temperature after evaporation of the solvent. Performance: No high temperature hardening at room temperature bridge, it can get the property of bridge. It is light yellow, transparent liquid. It is able to resist the erosion of the solvent Application: suitable for XPE, Polyurethane foam materials, and double sticky tape. Features Solid content 50±1% Viscosity(LVC, N4,60r/minute, 25°C) 4500±1000 Solvent: Ethyl, Acetate, Toluene The Viscosity of the Adhesive on 25μm Mylar(only for reference) drying condition 5minutes at 90°CInitial adhesive power (J. Dow) 12 - 18Holding adhesion power (2.5cm x 2.5cm x 1kg 25°C) 48Adhesion power 180° (PSTC-1) KG/inch 1.3film thickness 25 μm Storage Stored in sealed closed vessel, to prevent evaporation. Set the vessel in shadow, with temperature under 24. Under this storage condition, this product has 3 months storage period. After 3 months storage, the viscosity may increase, but other properties stay same. Solubility: PS-816 pressure-sensitive adhesive is soluble in ketones, esters, aromatic and aliphatic hydrocarbons. Note: User should test the product before use, to check whether the products can meet the typical application and technique.