PS-616 Kontaktklebstoff für PVC Film

PS-616 Solvent Pressure-sensitive Contact adhesive GlueFor PVC Film Feature: PS-616 solvent pressure-sensitive adhesive is self-bridge solvent Acrylic resin. It can bridge at room temperature after the solvent evaporates. Properties: 1. No high temperature hardening at room temperature bridge, it can get the property of being bridged. 2. It is clear and transparent, colorless film. It is able to resist the erosion of the solvent. Application: With good viscosity, it is an ideal product for industrial tape, such as double sticky tape, foam tape, PVC, cold laminating film, copper foil and aluminum foil, PET Label, PVC Car sticker. General features Solid content 50±1 Viscosity(LVC,N4,60r/s,25 °C) 5000±1000 viscosity Solvent: Ethyl Acetate, toluene The viscosity of the adhesive on PVC (only for reference) Drying condition5 minutes at 90°CInitial adhesion power(J.Dow)11 18Holding adhesion power>48hours(2.5cm×2.5cm×1kg,25°C)180°adhesion(PSTC-1),kg/inch>1.2 adhesion powerFilm thickness25μm Storage: Sealed in closed vessel, to prevent evaporation. Set the vessel in shadow, with temperature under 24. Under this storage condition, this product has 3 months storage period. After 3 months storage, the viscosity may increase, but other properties stay same. Solubility: PS-616 pressure-sensitive adhesive is soluble in ketones, esters, aromatic and aliphatic hydrocarbons. Note: User should test the product before use, to check whether the products can meet the typical application and technique.