programmierbaren Thermostaten (CE, UL)

programmable thermostat; LCD thermostat,water radiant heatingthermostats; electric heating thermostat; KTH401 is an 7 days programmable room thermostat Designed for water boiler and electric heating application. It can be used for hot water radiant heating systems and electric heating cable system Application: hot water radiant heating systems electric heating cable system Heating film. electric furnace HEATWAVE UNDER TILE HEATING SYSTEM 2 battery AA type power supply Manual work feature Heating or cooling mode with front panel selection. OFF position with adjustable anti-freeze funtion Power Supply: DC3V, 2×AA battery; AC24V/AC110V/ AC210 230V, 50/60HZ Max fuse power/On/Off switch /Outer relay max load: 2000W / 8A Accuracy: ±1ºC. Set-point Range: 5ºC - 37ºC. Power Consumption: <1.5W. programme: 8 factory pre-determined plus 8 user defined Separate programs for each day of week. mode: comfort mode and economy mode selection Manual override selection. time delay:separate heat/cool on-off time delay .hold-timer: for special controlled temperature for a certain selected hours. Sensor: internal sensor and external sensor ( floor heating sensor) Relative Humidity :< 92 %( no condensing) Dimension: 132*90*30mm (H*W*D) Features HEAT/OFF/ON select by switch . room sensor control mode or room sensor with floor limiter sensor control mode. Memory mode to reset to previous conditions. Low Temperature Protection: auto start at temperature below 5, prevent frostbite. Clock or selectable indicator. Timing on/off function: Setting Turn on/off within 12hours. Temperature calibrations: Function when the tested temperature is not conforming to actual room temperature. Circulating(cycle)mode thethermostat usually start to workfrom 8:30 am to 5:30 pm at a week, from 9:00 am to 6:00 pm at the weekends, the set-point is fixed. 11 5+2 or 7 days 4 periods and customizing Programmable. (Separate programs for each day of week.) key-lock fuction(Optional) room sensor control mode or room sensor with floor limiter sensor control mode. pump protection available. Specification *7 Day Programmable control(5+2 or 7 days optional) 4 programs per day *Contact Capacity: 16A/220VAC *Temperature Control Range: 5-30 *Accuracy: 0.5 with frost protection mode *Sensor Cable Length: 2m (optioal) *Different settings for each week day *Built-in pre-set operation programs *3 program saving setting *Time and Week display Room and Floor temperature senor and °F readings Product installation instructions Product warranty form *Large LCD display CE approval (IEE regulation)