Pneumatic Single Seat Control Valvesingle seat control valve,control valve, pneumaticHTS single seat valve is a up-leading structure control valve. The valve body which has a S-curved, minimizing losses of decompression, high capacity, widely usage range , a big square meter of disc leading, and anti-knock. This control valve used multi-spring diaphragm actuator. Tech specification and capabilityBody Type: single seat control valve Nominal diameter: 40-200mm Nominal pressure: ANSI125 150 300 600 JIS 10, 16, 20, 30, 40K PN1.6, 4.0, 6.4Mpa Connect ends: flange: FF,RF,RJ,LG Design as per standard ANSI B16.5;JISB2201JB/T79.1 PN1.6Mpa, JB/T79.2 Welded :SW(40--- 50mm) BW(65--- 200mm) Materials: HT200 ZG251 . ZG1Cr18Ni9 ZG0Cr17Ni12 Mo2 1.25Cr0.5Mo 5.0Cr0.5Mo. SCPH21 SCPH61 Ti Bonnet: nominal temperature (P): -17---+230 ExtensionI-45---+17 +230---+566 Extension (II)one-piece body: (E2I) -100---45 Welded type(E2W) -196--- -100 Gland type: bolt hold-down Packing: V-type PTFE, flexible-graphite packing Trim Disc type: up-leading single seat plug type Flow characteristic: High definition medium, Chart2 FYR High volume medium chart2 FYR Stellite replanting: disc Working range: Chart3 for the working temperature and pressure ranges of soft seat rings Chart4 for working temperature and pressure range corrugated pipe seal. Chart5 for working temperature and pressure range of stellite replanting The sleeve of one piece or split type chosen were depends on nominal diameter, material, and working temperature Material :stellite replanting. Actuator Type: HA multi-spring diaphragm actuator Diaphragm material: rubber. Spring range Supply pressure Air source connection Working temperature Remark: also can be suitable with VA5,VA6 actuator. Operation type: fall-air open/fall-air closed Accessories: positioner ,hand-wheel, switch box Capability Leakage :metal seat :design as per ANSI B16.104IV grade , rated CV 0.01%. PTFE seat ring : design as per .grade ,. Rated CV7-10 . Stellite replanting seat ring: rated CV 10-7. Return difference:(without positioner) (with positioner) Linear: (without positioner) (with positioner) Remark : the V type packing should be used . Ordering Information: 1. Product name and model 2. DN 3. Rated flow coefficient KV 4. Nominal pressure and differential pressure 5. Valve and valve components of materials 6. Connection 7. Transmission 8. Flow characteristics 9. Suitable temperature 10. Control signal is a 4-20mA current or 1-5v voltage signal 11. Valve product with attachments so that we can correct for your selection.