PE wasserdichte Membran

Polythene and Polypropylene Polymer Compound Waterproof Membrane INTRODUCTION: With polyethylene type polymer synthesis material as its main waterproofing layer,HY120 series polymer compound waterpioof membrane,compounding ageing resistance layer,bond strengthening layer with polypropyiene nonwoven cloth by automatic production line.Available size:Thickness(mm)Width(m)Length(m)1.52.0 or 3.015 or 20/roll2.02.0 or 3.015 or 20/roll3.02.0 or 3.015 or 20/rollNote: Other sizes can be offered upon specific requirementsApplicable range Tunnel, outside wall and interior wallCHARACTERISTICS1>Non-toxic,no pollution,environmental proecting product;2>Excellent adhesion to many surfaces,especial direct adhesion to many surfaces,especial direct adhesion to cement material in its curing process; 3>tough,impermeable,multilayered sheet; 4>high tensile strength,goog cold flexibility.SPECIFICATIONNoITEMFS21Tension N/cmNormal temperature ≥6060°C ≥302Pull lengthening,%Normal temperature ≥400-20°C1003Break tension,N204Water impermeability,30min,0.3MpaNo leaking5Cold bending,°C ≤-206Heating elongation,mmelongation ≤2shrinkage ≤47Hot air ageing (80°C×168h)holding of tension strength at break % ≥80holding of pull lengthening at break % ≥708Alkali-proof[10%CaOH)2 normal temperature ×168h]holding of tension strength at break % ≥80holding of pull lengthening at break % ≥80Installation Method1>The application is simple and no-pollution.It is mainly used in the middle of building for waterproofing.On this layer,other layers of protection and decoration are needed. 2>When application,pour the adhesive materials homoeneously on the smooth roof dexk,then roll the menbrane to make is fully adhered to the deck. 3>The adhesive materials are usually made form water.425# cement and 107# or other building glue at the volume rate of 3:6:1.4>The application is simple and no-pollution.It is mainly used in the middle of building for waterproofing.On this layer,other layers of protection and decoration are needed. 5>When application,pour the adhesive materials homoeneously on the smooth roof dexk,then roll the menbrane to make is fully adhered to the deck. 6>The adhesive materials are usually made form water.425# cement and 107# or other building glue at the volume rate of 3:6:1.