Original IC A1374EKBTI-T

Features and Benefits Output pin programming Field-programmable for optimal application integration Selectable coarse and fine gain and quiescent output voltage Selectable sensitivity temperature coefficient Selectable output clamp voltage level, including no-clamp (rail-to-rail) Selectable output polarity Unipolar or bipolar operation Ratiometric sensitivity, clamps, and quiescent output voltage Chopper-stabilized Hall technique Wide operating temperature range On-chip regulator for over/under voltage protection On-chip regulator provides EMI robustness Wide lead-spacing with KB package Description The A1373 and A1374 high precision linear Hall effect sensor ICs are sensitive, temperature stable, linear devices with externally programmable features. This device family incorporates a chopper-stabilized amplifier, voltage regulator, programming logic, and an output amplifier on a single IC. The patented dynamic offset cancellation used with a chopper-stabilization technique provides extremely low offset and minimal temperature drift. A high frequency clock is used for chopping, to ensure high frequency signal processing capability. The A1373 and A1374 are ideal for use in automotive and industrial linear position-sensing applications that require increased reliability and accuracy over conventional contacting-potentiometer solutions. Key applications include: throttle position sensor ICs, pedal position sensor ICs, and suspension height sensor ICs. The design and manufacturing flexibility of the A1373 and A1374 complement the Allegro linear Hall effect family of devices by offering programmable gain, quiescent offset voltage for unipolar or bipolar operation, temperature coefficient, clamps, and polarity. The device can be set up in a magnetic circuit and programmed with a train of serial pulses via the output pin. Once the right combination of gain, quiescent output voltage, and temperature coefficient has been selected, the codes can be locked for one-time programming. In this manner, manufacturing tolerances can be reduced and the assembly process can be simplified. These devices are available in the KB package, a 3-pin SIP (single inline package). The lead (Pb) free version has a 100% matte tin plated leadframe.