packaging machine details: Machine name:hot melt labller model:SORL-T series labeling type:all around operation type: rotary type head quantity: according to capacity and diameter of container glue type:hot melt container diameter:35-115 manufacture:SMPACK 1.1).easy operation to adjust label cutting knife 1.2).vacuum drum made of high rigid material to minish friction and static 1.3) rapid changeovers: modular design and quick release change parts have changeovers fast and easy in ten minutes 1.4).using handle to adjust the position of cutting knife is possible and exactly 1.5).vacuum manifold at the lower part of drum and cutter, made of heat & wear resistant material 1.6).automatic label length controller to adjust position of I-MARK 2.label label material:OPP, PVC, PAPER ect label size:as demanded labelling method: hot melt labelling 3.machine description 3.1) rotary type 3.2) label in-fed from label station is conveyed to label in-feed roller through label guide roller 3.3) sensors will check I-MARK of label automatically when label reaches label in-feed roller 3.4) as soon as the position of I-MARK is confirmed, Encoder will adjust the operation speed of label in-feed roller and then appoint the label cutting position 3.5) label which has been cut is conveyed to vacuum drum 3.6) after checking label attached on vacuum drum by sensor, label is conveyed to glue roller and then inject hot melt on label 3.7) to adjust containers by in-feed star wheel and do labeling in roller zone for the first time and then labeling operation will be done perfectly by side belt. 4. safety: 4.1)control : PLC, inverter 4.2) safety attachments overload running safety equipment attached on driving zone stopper for abnormity operation of in-feed star wheel no bottle fed (sensor check) overload for bottle fed (sensor check) no bottle no labeling 5.Main construct 5.1) conveyor part 5.2) timing screw 5.3) star wheel 5.4) X-guide 5.5) orientator 5.6) rotary disc 5.7) upper parts 5.8) central positioning parts 5.9) lift parts 5.10) main frame 5.11) driving part 5.12) label station 5.13) label cutting parts 5.14) vacuum drum 5.15) glue drum 5.16) hot melt applicator 5.17) air unit & lubricate parts 5.18) electric part 6. change parts 6.1) in feed star wheel 6.2) vacuum drum 6.3) dividing star wheel 6.4) in feed guide part 6.5) roll on pad 6.6) Rear guide 6.7) side belt part 7.electric & air 7.1) electric supplying electric :380V x 50/60Hz x 3Phase operating electric :380V AC,24V DC consumption :10Kw 7.2)pressure pressure:4∼6kg/sq dry&clean air consumption: 300l/min pipe size :3/8inch 8.machine size:refer to drawing 9.painting: As demanded operating condition: temperature:20°C 30°C(keep in dry place at the room's temperature)