ölabsorbierende

Side armor penetration materials, Other cottony kiss composite armor and liquid, tensile strength, good, Prevent trample; Bottom layer with block. After absorbing liquid permeates the ground is not working or after use, easy to clean. Can be placed in a long time, not the original workplace environment caused by any pollution, no liquid and hair debris left, more suitable for the ground move and the workplace. Size Count&PackingAbsorbencyφ7.6cm*1.2m20L/B>165L/Bφ10cm*3m8L/B>150L/Bφ12.7cm*3m4L/B>125L/Bφ12.7cm*6m2L/B>125L/Bφ20cm*3m4L/B>305L/Bφ20cm*6m2L/B>305L/B 1, the anfield oil absorbent material is widely applied in adsorption, cleaning and recycling of waste oil leakage and discharge, clear sea, rivers, lakes, 2, shipping, oil, water port wharf etc, also used in oil liquid machine factory, pipes, such spill prevention. 3, anfield, oil absorption cotton contains no dust particles and friction, when using, no damage to the equipment surface. 4, cotton, oil absorption anfield absorbs the liquid, through extrusion can reuse, only 10% of the time will be reduced by extrusion of adsorption ability, oil, reduce the waste recycling. Anfield oil absorption cotton can burn or mix with fuel burned, only use after the residual 0.02% ashes. the adsorption capacity, the standard of weight 10 20 times, it is applicable for various oil leakage of liquid. Second, efficient type: the superfine fibers anfield proprietary technology, adsorption capacity of gravity of 20 30 times, it is applicable for various oil and 50% alcohol concentration liquid leakage. Third, antistatic type: through special processing, antistatic, applicable to the requirement of antistatic, may reduce the adverse effects. Characteristic and function: 1, oil absorption, not bibulous 2, not bad, not decompose; after oil absorption water 3, absorbs the liquid can squeeze repeated use 4, can burn or mix with fuel Suggestions for places: 1, sea, rivers, lakes, shipping, dock port, the oil depot liquid water, etc 2 and other granular clay, processing plant pipe leakage occurs leakage of liquid or equipment Three, for sewage wastewater tank or collect of waste oil liquid. Intake of pollutants and oil for oil pollution prevention and intercept processing.