Neueste Art: 160w LED Tunnel-Licht

Led tunnel light YR-TD605-W160: 160w MaterialHigh-purity aluminum reflector, heat lamps and body shell; 5mm High intensity tempered glass cover;double high-power LED light source; high efficiency constant current source. Parameter: Model numberYR-TD605-W160 LED consumptions134 WSystem Consumption155WLED initial fluxWWPWCW10988 Lm11390 Lm11122 LmPower factor≥0.95Total hamornical distortion≤9%Power efficiency≥87%Power efficiency≥85%installation height6M8M10MAverage illuminance≥54 lux≥31 lux≥22 luxIlluminance Area10M*10M14M*14M17M*17MIlluminance Uniformity≥0.6Color Rendering IndexWW:Ra≥68; PW/CW:Ra≥75Beam angle120Working voltageDC30-36VInput voltageAC90V-264Vfrequency range50Hz--60HzJunction Temperature≤80°CWorking Temperature“-40°C～+55°C”IP GradeIP65LED Working life-span≥50000HCertificateCE，Rohs,Packing dimension46*34*66cmNet weight/gross weight5.9kg/6.4kg 2pcs in 1 carton Applicable to places Tunnel, underground passage, railways, underground car park, such as the need to place indoor lighting. Features 1, The use ofcompositivehigh-power packaged LED (50W) as light source, the use of unique multi-chip integrated group of single-mode light source design, selection of imported high brightness semiconductor chips with high thermal conductivity, light failure Small, light color purity, no ghosting and so on. 2, The overall tensile aluminum body cooling, the internal LED light source closely connected with the outside and the air convection heat, guarantee the effective life of the LED light sources. 3, High temperature, anti-aging silicone rubber seal, so that body heat, cover, perfect combination of glass, light shell surface and spray the anodic oxidation processing, lighting level of protection IP65. 4, Germany, imported high-purity aluminum reflector cover, effectively improve the reflectivity, and to ensure that the luminous flux output. Targeted to control the LED light the issue of the need for the framework to enhance the lighting effect of the light uniformity and utilization of solar energy. Highlights the obvious energy-saving LED lighting advantage. 5, LED light source does not exist to start the tunnel latency issues, power to work immediately. To solve the traditional lamp to start the long process to achieve a transient start-up and re-start. 6, For a more realistic colors bright. LED tunnel light color-rendering index of up to 80 close to natural light. Vehicles entering the tunnel, the driver can quickly adapt to changes in light color, to ensure the safety of the road. 7, Green non-polluting: the design of cold-light source, no heat radiation, the eyes and skin without any harm, lead, mercury and other pollution elements, to achieve a real sense of the green energy-efficient lighting. 8, Combined with solar energy is an excellent partner, give full play to work with LED low-voltage DC energy saving and environmental protection advantages of solar photovoltaic panels and LED light combination for the customer to achieve the best cost-effective and high reliability.