Nadelhülse Kupplungs

The drawn cup needle clutch HF,HFZ series is composed of thin wall punched outer ring and plastic retainer.There is a clamping slope which holds the needles tightly on the inradius surface of the alloy steel punched out ring.The abrasion resistance and load capacity is greatly increased after special heat treatment.Metal springs are fitted on the plastic retainer which keeps the correct movement of the needles while the needles are used as clamping unit at the same time. Through fitting FHL drawn cup needle roller bearing HK,SCE series of the same diameter on the two sides of drawn cup needle clutch,better supporting rigidity and rotation characteristics are achieved. Our products are sold well in domestic markets and overseas. Example: Shaft diameter(mm)Bearingdesignation Rotation torque(Nm)Draw cup needle roller bearingsis to adapt for radial support4HF04060.34HK0408TN6HF06121.76HK06088HF08123.15HK081010HF10125.3HK101012HF121612.2HK121214HF141617.3HK141216HF161220.5HK161218HF181624.1HK181220HF201628.5HK201225HF252066HK251230HF302090HK301235HF3520121HK3512 Shaft diameter(inch)Bearing designationRotation torque(ib.in)Draw cup needle roller bearings is to adapt for radial support1/4HFZ04070818.6SCE443/8HFZ06100850.4SCE681/2HFZ08120885.9SCE875/8HFZ101410175.2SCE1083/4HFZ121610247.8SCE126If you want to order the product,please contect me.