MP Anti-Strahlen-Patch

M.P. anti-radiation patch(radiation shield for cell/ mobile phone) It can effectively remove phenomena such as , insomnia and hair loss. Bifunctional patch Anti-electromagnetic Radiation Chinese Patent, NO. ZL200320102099.3 Extension of standby time Product standard, Q/MGJTS001-2008 Radiation reduction of 96.43%(SAR) Product test, NO.13-05-2005E00558 When you are enjoying the convenience brought by modern technology every day, have ever thought about that your health has suffered about the invisible killer of this electromagnetic radiation unknowingly? Radiation of M.P. is mainly more harmfully on the head, it can cause the function obstacles of central nervous system which can cause many symptoms, such as headaches dizziness, ,hair loss and etc. The ultra-thin patch? ed by the research and development staff of Mastership? company with special material can absorb and the azimuth of excessive harmful radiation produced by sending and receiving signals of the mobile phone, thus avoid the radiation on the human brain damage. It shows that the product can reduce the absorption rate (SAR) of the radiation on the human brain is 96.43% tested by Communications Measurement Center of National Information Industry Ministry.When the patch is pasted on the mobile phone battery, it can not only reduce the effectiveness of radiation but also resume the effectiveness of battery capacity and extend the standby time, it is the patent technology of of Mastership Commercial Company. Features, 1. Absorb and transfer electromagnetic radiation waves by using special materials and reduce mobile phone radiation injury on the human brain of 96.43 percent. 2. Extend the service life of rechargeable battery two to three times. 3. Quick charge and save 50% of charging time. 4. Resume the battery capacity and extend the standby time 0.5-2 times. Directions for use, 1.Take off the adhesive tape on the back of the patch2. Paste the side of patch on the back of mobile phone near the antenna (antenna position is on the top left or top right of M.P., where the patch can reduce the radiation rate more than 95 percent). 3. When pasting on the battery, we shall pay attention to avoid of the electrode of battery, either the front or back can be pasted. 4. Anti-radiation patch can be cut as the necessary size which does not affect product features. To play a good effect, it must cover more than 70 percent of the battery area when being pasted on the battery * Possible Problems and the Explanation for Radiation Testing Effects * When simply observing the radiation effect of mobile phone with the monitor or speaker, due to the different location of the patch affixed to the back of phone, it can possibly appear the phenomenon of poor radiation effect, but it is not the quality problem of patch, it is because of not pasting the patch near the antenna of mobile phone. Phone is generally on the top left or top right of the back. * How to observe the mobile phone effect after affixed with a patch. Please paste patch on the battery (either on the front or back side), repeatedly charge and discharge more than 2 times (each discharge is to the automatic shutdown and then recharge). Observe carefully and you will find that the battery fully charged time decreased a half. Phone standby time is gradually extended. Note: If there is any phenomenon of damage, deformation, liquid leakage and etc on the rechargeable battery, it can not be used. This patch had no effect on the human body and of mobile phone. ** The battery sticker has no impact to human body or handset receiving.