Modular-Stecker Crimps, Strips & Cuts Werkzeug

1) Squeeze handles and push the lock upwards to open the tool 2) Cut the modular cable to the desired length,make certain that the end are cut squarely,not diagonally 3) Insert flat cable between the stripper blades until it reaches the stopper. 4) Squeeze handle,cable must be kept perpendicular and then pull out from the tool 5) For stripping round cable,insert the stripping hole, and then turn the cable in counter-clockwise direction 6)Remove the outer jacket,insert the stripped cable into the plug,make sure the left wire at one end matches the right wire at the other end 7)Place modular plug with cable into the tool's holder.Make sure the stripped wire is between the gold contacts.Squeeze handles until is stop