Modell DPP-250E Aluminium Aluminium-automatische Blasen-

Apilication: The product uses the composite Aluminum film as material which has best performance of seal, proofing moisture and light, and uses special mould to cool-form. It is renewed packing equipment in pharmaceutical industry. The machine has two functions. When it changes mould, the machine can pack the object not only with Aluminum-Aluminum, but also with Aluminum-Plastic. Performance and characteristic Travel scope can be adjusted. Mould is located by locating groove, so that its easy to change mould. Adopt cool-forming moulds. Speed is shifted by step-less transducer. Adopt the interface of human-machine and PLC programmable controller. Adopt photoelectric empty-detecting equipment and waster-eliminating equipment. The heating moulds will automatically separate when the machine stops, which contributes to protect the material between them and extend the machines life. Adopt the equipment of trace pressing, batch number printing and scarp-collecting. Stepping motor drive wheel to grip and tow wrapper, Synchronize accuratelyMain Technical Parameter MODEL140EBlanking frequency(sheets)15-30Sheet's quantity of one blanking(sheets)2Capacity:(sheets/hour)1800-3600Adjustable scope of feed travel:(mm)100-130Max Forming area and depth:(mm)PVC(For medicine):1430×130×15Capacity of air compressor(m3/min)≥0.36Power supply:(KW)380V 50HZ 5.5KWWrapper specification(mm)Composite Aluminum film140×(0.11-0.15)PTP Aluminum film140×(0.02-0.035)Overall dimensions (mm)2050×530×1350Weight(kg)700