Metallic-Pulverbeschichtung

Features:ColorAll RAL colors are available to meet customer’s requirementGlossinesshigh-gloss, semi-gloss, low-gloss, mattSurfaceSmooth and special finish(texture, wrinkle, hammer, etc)for all kind of glossDensity1.3-1.8g/cm3TypeEpoxy and polyesterStorageThe products should be stored in ventilated, dry and clean room with the temperature below 30.Not to be close to fire and heat and kept out direct sunlight. Outdoor stacking is prohibited. On the condition mentioned above, the products can be stored stably for 12 months.ApplicationReinforcing steel, machinery and electrical equipment, steel pipe, shop good shelf, furniture metal stand, gymnastic and facilities, household apparatus, hospital equipment, camping accessories, agricultural machinery, automobile components, antitheft door, industrial equipmentPackingInner packing: Double PE bagsOuter packing: 50ctns(1000kg)/palletNet weight:20kg/ctnTechnical indexes of powders:Appearance (visual)Homogeneous colour without any agglomerateFineness(180mesh sieve residue)<0.5%Gel time30-180S(200°C±2°C)Curing condition180°C/15minFused flowability20-70mm(150°C±2°C)Average coverage rate 10m2/kgProperties of coating film:StandardsPropertiesFilm appearanceBy naked eyesSmooth and uniformFilm thicknessISO236060-80μmGloss 60°ISO28132-95°Impact resistanceASTM D2794GB/T1732-199350KgPencil hardnessASTM D3363GB/T6739-19962HAdhesion(cross cut)ISO2409GB/T9286-19980 grade(1mm6×6)FlexibilityASTM D5221/8Cupping testGB 9753-19886mmBend testISO1519GB/T6742-19863Color differenceNo obvious color differenceSalt spray testISO9227GB/T1771-1991>500Humid heat resistanceISO6270-1GB/T1740-1979>500Notice:Aviod inbreathing dust when using the products though the powder coatings are nontoxic. The operations are suggested to wear protective glasses and respirators. Avoid long-term skin touch with the powder if possible.This technical date is only for user to reference, in case of the problem can not be solved, please contact the technology department of our factory.