Mechanische Reifen Formen und Härten Press B-Typ fo

This Curing Press is appliable for curing OTR tyres with Nitrogen or steam as curing medium. This Curing Press is a Mechanical type, the beam moves vertically and horizontally for tyre loading and unloading. The center mechanism is BOM type and the curing mould is heated by DOME.Other features: Single-Column Vertical Chuck Loader for both Loading and Unloading tyres, Pro-Bar Style Mould Stripping Unit.As per customer's request, Auto-Adjusting Device, SMO Drive Device, PCI and Green Tyre Holder are available. Curing Piple can also be made into order. This Curing Press uses PLC for real-time control, and industrial PC forHuman-Machine Operation Interface.All parameters can be re-set during Curing Cycle, and real-time data collection/preservation,alarming,as well as data back dating can also be realized through this system. With ethernet interface,Curing Press group-management is available. Brief Technical Parameters:1 Type of Cured Tire OTR Tire2 Heating Type Dome3 Number of Mould 14 Type of Center Mechanism BOM5 I.D. of Mould Shield 2565mm6 Max. Mould closing force 13685kN7 Height of Mould 600-1070mm8 Max Mould Weight 25000kgs9 Diameter of Bead 24-4610 Max. Height of Green Tire 1880mm11 Max. OD of Cured Tire Two-piece Mold 2286mmSegmental Mold 1981mm12 Max.Section Width of Cured Tire /13 Designed Mould Open/Close time 129s14 Max Load of VCL 1060kgs15 Max External Pressure 0.91Mpa16 Max.Internal Pressure 2.8Mpa17 Hydraulic Water Pressure 1.8-2.1Mpa18 Compressed Air Pressure 0.7Mpa19 Control Air Pressure 0.35Mpa * Our Curing Press range is from 40.5" to 125".